Pawa PG510 Oil-Resistant Cut Level D Gloves

Designed to provide protection against mechanical hazards, oil and grease while providing good grip, the Pawa PG510 Oil-Resistant Cut Level D Gloves are constructed from a high-performance, cut-resistant liner with two nitrile coatings. The first nitrile layer creates a liquid-proof barrier, while the secondary nitrile micro foam coating provides excellent grip in wet and oily conditions for safer, easier handling.

Product Codes

• Pawa PG510 Oil-Resistant Cut Level D Gloves – Size 8 (Medium): PG51012
• Pawa PG510 Oil-Resistant Cut Level D Gloves – Size 9 (Large): PG51013
• Pawa PG510 Oil-Resistant Cut Level D Gloves – Size 10 (Extra Large): PG51014

Which Size Should I Choose?

To find the right size for you, please measure the circumference of your hand (excluding the thumb) around your knuckles with your fingers closed, as shown in the diagram below. Then, match your measurement to the corresponding size in the sizing guide below the diagram, and select using the drop-down menus near the top of the page.

Why Should I Buy the Pawa PG510 Oil Resistant Gloves?

• Cut-Resistant: High-performance anti-cut yarn liner with full nitrile coating
• Oil-Resistance: Coated with a layer of nitrile and a layer of nitrile micro foam for oil resistance
• All Round: Excellent resistance to abrasion, cut, tear and puncture
• Water: Liquid-proof and oil- and grease-resistant coating
• Grip: Excellent grip in wet and oily conditions
• Wrist Protection: Extended cuffs provide protection to the wrists
• Comfort:Anatomical design prevents hand fatigue

Where Can I Use the PG510 Oil-Resistant Cut GLoves?

The Pawa Gloves offer a good level of cut resistance with high dexterity, making them ideal for tricky tasks that demand cut protection. Suitable tasks include:

• Automotive
• Construction
• Handling oily components/parts
• Material handling
• Municipal services
• Recycling
• Steel and metal fabrication
• Steel and metal handling
• Vehicle recovery services
• Waste management
• Waste sorting operations

What Can the Supertouch Gloves Protect Me From?

To ensure these gloves provide you with the protection you need, they have been tested to a range of different standards. The results of mechanical resistance tests under EN 388 can be found in the table below. More information on the standards to which these gloves have been certified can be found in the PDF documents near the bottom of this page.

EN 388

• EN 388: 4444D

How Protective Are the PG510 Oil-Resistant Cut Gloves

Constructed from a high-performance, cut-resistant liner with two layers of nitrile coating, the ST Gloves provide outstanding protection against mechanical hazards, achieving high ratings for resistance to abrasion, cut, tear and puncture when tested to EN 388:2016. As a result, these gloves are suitable for an incredible range of tasks across dry, wet and oily environments.

How Grippy Are the Pawa PG510 Gloves?

The Supertouch Gloves are built with two layers of nitrile, with the first creating a liquid-proof barrier that prevents water, oil and grease from permeating the liner to protect the hands and keep them dry. The second layer of nitrile micro foam promotes good grip in both wet and oily conditions for easier, safer handling and reduced hand fatigue.

Product Codes

Documentation for the PAWA PG510 GLOVES

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.