TRAFFIGLOVE TG595 GLaze cohesion xp COATING CUT LEVEL 5 SAFETY GLOVES

The TraffiGlove TG595 Glaze Cohesion XP Coating Cut Level  5 Safety Gloves are comfortable and breathable with an ideal for use in oily, wet and dry conditions. 

With a close fit to ensure the gloves do not restrict the hands, the TraffiGlove TG595 Glaze Cohesion XP Coating Cut Level 5 Safety Gloves are the perfect choice for tasks that require a high level of cut protection.

MAIN FEATURES OF THE TRAFFIGLOVE TG595 glaze Cohesion xp COATING CUT LEVEL 5 SAFETY GLOVES

With a seamless knitted cut resistant thread liner, the TraffiGlove TG595 GLaze Cohesion XP Coating Cut Level 5 Safety Gloves  also feature a Cohesion XP coating. Cohesion XP coating provides an excellent grip in dry and oily conditions and a good grip for wet work. The Cohesion XP coating provides a protective barrier so oil cannot get through to the hands. The coating leave no fingerprints of uncoated glass and is solvent free, the gloves are ideal for those allergic to latex. Cohesion XP coating lasts much longer than standard natural rubber coatings and ensures durability for long lasting wear.

The TraffiGlove TG595 Glaze Cohesion XP Coating Cut Level 5 Safety Gloves feature a high cut, abrasion and tear resistance and meet the requirements of EN388 Cut Level 5.

TESTING OF THE TRAFFIGLOVE TG595 GLaze Cohesion xp COATING CUT LEVEL 5 SAFETY GLOVES

APPLICATIONS FOR THE TRAFFIGLOVES TG595 GLaze COhesion xp COATING CUT LEVEL 5 SAFETY GLOVES

• Groundwork

• Construction (dry trades)

• Transport

• Highway maintenance

• Goods handling and warehousing

SIZING INFORMATION ON THE TRAFFIGLOVE TG595 glaze cohesion xp coating CUT LEVEL 5 safety GLOVES

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

FURTHER INFORMATION ON THE TRAFFIGLOVES TG595 GLaze Cohesion XP COATING CUT LEVEL 5 SAFETY GLOVES

The TraffiGloves TG595 Glaze Cohesion XP Coating Cut Level 5 Safety gloves are supplied in pairs or in a pack of 10. 

Documentation

User Instructions

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.