UCi Armalite AV725P Yellow Nitrile Coated Manual Handling Gloves
UCi Armalite AV725P Yellow Nitrile Coated Manual Handling Gloves are designed specifically to shield your hands when manual handling in factories and warehouses. With a nitrile coating that's highly resistant to grease and oil, Armalite AV725P Nitrile Coated Work Gloves provide great protection in the face of hazards like rips, tears, scuffs and scratches.
They also feature a breathable back that allows air to pass through, mitigating irritation, discomfort and itching.
What's Included?
Sizing Information for Armalite Yellow Manual Handling Gloves
Armalite Yellow Manual Handling Gloves are available in four different sizes. To find the perfect one for you, simply measure your palm circumference (ignoring the thumb area) and the length of your hand as indicated in the image below.
Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
| Size | Palm Circumference | Hand Length |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Protection Ratings and Safety Standards
EN 388: Mechanical Resistance
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.
The EN 388 cut resistance test uses a single sharp implement to repeatedly pressure a glove in order to determine the amount of force required to cause visible and functional damage.
| Standard | Resistance Rating |
| Abrasion Resistance | Level 3 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 1 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | N/A |
Key Features and Benefits
- Lightweight construction lets your hands and fingers interact with delicate material
- 3/4 coating leaves the back of the glove open for maximum breathability
- Prevent sweat, odour and perspiration build-up inside your gloves
- Jersey cotton lining ensures comfort
- Great resistance to oil, grease and dirt
- Affordable option for mass outfitting a manual handling or warehouse team
- Available in a range of different sizes
Who Can Use Armalite Nitrile Coated Manual Handling Gloves
Designed specifically with warehouse and factory professionals in mind, Armalite 3/4 Manual Handling Gloves are ultra-affordable work gloves designed to protect against low-risk scuffs, scratches and abrasions in following types of environment:
- Warehouses
- Factories
- Yard Work
- Clearance
- Assembly
- Instillation
- Removal
- DIY
- Manual Handling
- Shipping
- Picking and Packing
What Are the Benefits of a Nitrile Coating?
Nitrile is an incredibly flexible coating that provides additional resistance to oil, fuel and chemicals. Nitrile is used as a protective coating in gloves because it matches the pliability of latex with the hazard and injury protection properties of a heavier, woven glove.
Maximum Breathability
When you work long hours in a busy, fast-paced environment, sweating is inevitable. Armalite 3/4 Nitrile Coated Work Gloves use a 3/4 only coating, meaning the back side of the gloves are left open to allow air to pass through, alleviating the build-up of moisture and sweat.
This helps prevent dermatological conditions like eczema and dermatitis forming on your hands.
"Sanitized" Antimicrobial Treatment
The Sanitized fabric hygiene system helps to reduce the growth and spread of microorganisms that are particularly problematic, such as clostridia and other antibiotic-resistant bacteria. This is particularly beneficial to work gloves because of the build-up sweat and the risk of cross contamination from hand to face throughout the day.
Ultimate Industrial have partnered with Sanitized to reduce this risk and manufacture gloves that not only provide all the protection you'd expect, but that keep your hands hygienic and odour free too.
Great Resistant to Grease and Oil
Grease and oil are everywhere, even if they're invisible to the naked eye. Everything we touch and interact with, especially in a warehouse or factory, has some amount of slick moisture on top of it.
Armalite AV725P Nitrile Coated Work Gloves feature a nitrile coating that works tirelessly to absorb this oil, allowing you to grip, pick up and interact with slick material with ease. Nitrile absorbs liquid, no matter how microscopic, giving you a more stable and secure grip.
Makes Mass Outfitting Affordable Again
Mass outfitting shouldn't cost an arm and a leg. Whether you're purchasing for yourself and you're after a bulk pack that keeps costs down, or you're a procurement professional responsible for outfitting an entire team, you can't go wrong with the incredibly affordable Armalite Manual Handling Gloves.
Comfortable and Flexible Knit Wrist
A flexible knit wrist means you can work for longer without feelings of fatigue and tiredness creeping in to your wrists. It also serves as a snug barrier against dust, dirt and debris by stopping these unwanted particles from entering your gloves at the wrist.
Additional Documentation
.jpg)
