Delta Plus VENICUTD11 Cut Level D Nitrile-Coated Gloves

£9.87
(£11.84 Inc. VAT)
+
  • Pair of level D cut-resistant grip gloves
  • Nitrile-coated palms provide a secure grip on wet/oily objects
  • Ideal for handling tasks such as construction, maintenance and more
  • Lightweight with 21-gauge knit for optimal comfort and dexterity
FREE UK delivery

On all orders of £40 and above.

Buying in bulk?

Find out about purchase orders.

Got a question?

Get in touch with our sales team.

Information

Delta Plus VENICUTD11 Cut Level D Nitrile-Coated Gloves

When working in high-risk environments, you need a pair of gloves that can withstand a range of tasks while protecting you against potential injuries. The Delta Plus VENICUTD11 Cut Level D Nitrile-Coated Gloves are a great choice, with a high level of cut resistance and nitrile-palm coated palms which offer enhanced safety and an excellent grip. They're also ideal for tactile tasks, with a 21-gauge knit that promises dexterity and comfort.

What's Included?

  • 1 x Pair of Safety Gloves

Sizing Information

The Delta Plus VENICUTD11 Gloves are available in a choice of sizes. To find your correct size please measure the circumference of your palm and length of your hand as shown in the diagram below, and match your results to the table.

Hand Measurement Diagram

SizePalm CircumferenceHand Length
Size 6152mm160mm
Size 7178mm171mm
Size 8203mm182mm
Size 9229mm192mm
Size 10254mm204mm
Size 11279mm215mm

How Do the Delta Plus VENICUTD11 Gloves Protect My Hands?

Offering a high level of cut resistance (Level D) and nitrile-coated palms, these gloves are able to withstand tough tasks and shield your hands against dangerous and slippery objects. They're also crafted with a 21-gauge knit, promising unrestricted movement and dexterity for tasks that require more precision and tactile sensitivity.

For guaranteed protection, they've been tested in accordance with EN 388 to determine their mechanical resistance. The results can be found in the table below.

Testing to EN Safety Standards

EN 388 (Mechanical Resistance): 3242D

HazardResistance Level
AbrasionLevel 3
CutLevel 2
TearLevel 4
PunctureLevel 2
Blade CutLevel D

Read our guide to EN 388 for more information.

Key Features and Benefits

  • Cut level D gloves deliver excellent protection against sharps/rough objects
  • Nitrile-coated palms provide a strong grip in wet/oily environments
  • Dexterous 21-gauge knit improves mobility and precision
  • Open-back design increases breathability for optimal comfort
  • Ideal for heavy-duty and fine handling tasks
  • Anatomical design provides a comfortable fit, preventing fatigue

Where Can the VENICUTD11 Cut-Resistant Gloves Be Used?

Suitable sectors and applications for these gloves include (but aren't limited to):

  • Manufacturing
  • Maintenance
  • Oil and gas work
  • Automotive
  • Engineering
  • Assembly
  • Public utilities
  • Construction/Building

Dexterous for Unrestricted Movement

Constructed with a 21-gauge knit, these Delta Plus gloves are designed to enhance your dexterity and flexibility when working. Not only can this improve your accuracy with certain tasks, it can also help to reduce the chance of your hands becoming fatigued or even injured due to mobility restrictions.

Designed for Maximum Comfort

The back of the VENICUTD11 Cut Level D Gloves are uncoated, allowing for increased breathability. They also have elasticated cuffs and an anatomical fit, further increasing your comfort.

Documentation

Delivery

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order ValueUK Delivery Charge
Up to £39.99£4.95
£40.00 and overFREE

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.

Reviews

Be the first to Write a Review for this item!