Ejendals Tegera 9232 Insulated All Round Work Gloves
When working in cold conditions, you'll need gloves with a suitable lining to keep your hands warm and safe from the debilitating effects of frostbite. The Ejendals Tegera 9232 Insulated All Round Work Gloves are medium work gloves made with breathable Macrothan fibre. Featuring a winter lining of fleece, the Ejendals Tegera 9232 remain warm and comfortable in wintry conditions and are suitable for a variety of medium duty tasks.
The Ejendals Tegera 9232 Gloves are supplied in a black/grey/yellow design with reinforced fingers and thumb for additional protection. They feature an elasticated 360° fastening at the wrist for a comfortable fit.
The product code for these gloves is 9232.
Applications of the Ejendals Tegera 9232 Insulated All Round Work Gloves
The Ejendals Tegera 9232 are designed for use in dark, dry, clean, cold and dirty environments and are suitable for the following applications:
- Airport Work
- Building and Construction
- Carpentry
- Engineering
- Facilities
- HoReCa (Hotels, Restaurants and Cafes)
- Machine Operation and Driving
- MRO (Maintenance, Repair and Operations)
- Retail
- Service
- Soil Preparation
- Transportation
- Utilities
- Warehouse Work
Full Feature List of the Ejendals tegera 9232 Insulated All Round Work Gloves
The Ejendals Tegera 9232 Gloves feature an ergonomically shaped design which facilitates a perfect fit. A full feature list follows:
- Chrome Free
- Reinforced Index Finger
- Reinforced Palm
- Reinforced Seams
- Reinforced Fingertips
- Reinforced Fingers and Thumb
- Pre-Curved Fingers
- Specially Designed Thumb
- Windproof Back
- Ergonomically Shaped
- Reflector
- Specially Designed Details
Testing of the Ejendals Tegera 9232 Insulated All Round Work Gloves
- EN 388 Mechanical Risk testing:
Hazard | Resistance Rating |
Abrasion | 2 |
Cut | 2 |
Tear | 4 |
Puncture | 1 |
Hazard | Resistance Rating |
Convective Cold | 1 |
Contact Cold | 2 |
Water Penetration | 0 |
Sizing of the Ejendals Tegera 9232 Insulated All Round Work Gloves
The Ejendals Tegera 9232 are offered in five different sizes, the dimensions of which can be found below. To measure your hand, measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together.
Size | Circumference of Hand (mm) | Length (mm) | Minimum Length of Gloves (mm) |
Size 7 | 178mm | 171mm | 230mm |
Size 8 | 203mm | 182mm | 240mm |
Size 9 | 229mm | 192mm | 250mm |
Size 10 | 254mm | 204mm | 260mm |
Size 11 | 279mm | 215mm | 270mm |
Documentation for the Ejendals Tegera 9232 All round work gloves
Conformity Statement | Instructions for Use |
| |
Delivery
This item will be dispatched by Royal Mail, DPD courier or UPS courier.
The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).
Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.
UK Delivery Charges
Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.
Order Value | UK Delivery Charge |
---|
Up to £39.99 | £4.95 |
£40.00 and over | FREE |
Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.
Ejendals Sustainability Goals
Here at SafetyGloves.co.uk we take pride in sourcing sustainable and environmentally friendly suppliers. Ejendals are no different, with a company policy that puts being part of a global community at its heart. This policy includes not just a focus on reducing carbon emissions, increasing recycling and minimising waste, but working to reduce the impact of solvents used in gloves based on the current knowledge available.
A Focus on a Better World
Ejendals want to limit their environmental impact in order to make the world better for future generations. Their work includes:
- Imposing environmental requirements on those who deliver products, packaging and services
- Reducing the amount of chemicals used in the manufacturing process
- Ensuring that staff are educated on the impact of the materials used
- Manufacturing high quality products to ensure less waste
- Ship as much as possible to reduce aeroplane emissions
- Minimising waste and recycling materials
Ejendals are also certified in accordance with environmental management system ISO 14001. For a full breakdown of their sustainability goals, see the link below:
What is EN 388?
You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.
There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.
How Do I Read the EN 388 Score?
Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.
Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.
Where Can I Find Out More?
This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.