HexArmor Chrome Series 4022 Cut resistant Gloves

The HexArmor Chrome Series 4022 Cut Resistant Gloves are mechanics style gloves with optimum cut resistance according to EN:388 standards. The HexArmor Chrome Series 4022 Cut Resistant Gloves have an oil resistant synthetic leather palm which helps to protect against oil and grease. The gloves give a medium level of grip and dexterity so performing tasks yet still being protected by this medium duty glove is easy.

HexArmor products are engineered and manufactured to provide users with the highest levels of protection in areas where risk is greatest. HexArmor products are made and quality control checked to the highest standards and introduce innovation to engineering of safety glove products.

MAIN FEATURES OF THE HexArmor Chrome Series 4022 Cut RESISTANT GLOVEs

The Materials - The HexArmor Chrome Series 4022 Cut resistant Gloves are engineered and made with SuperFabric branded material giving the highest level of cut resistance on the market.

Grip - The grip of the  HexArmor Chrome Series Gloves consists of an oil resistant synthetic leather palm and PVC grip provides good dexterity and grip in light oil conditions.

Extra Protection - The HexArmor Chrome Series 4022 boasts a durable knuckle pad made from SuperFabric branded material which adds extra protection to this area on the back of the hand. The special durable fabric is reinforced with armour dimples making it strong yet flexible. The back of hand protection can be seen in the image below.

Testing - The Chrome Series 4022 Gloves are a Certified Safety Glove, scoring a 4541 in testing. The gloves adhere to the highest level of cut resistance according to CE standards as well as performing well in abrasion resistance tests. See below for a breakdown of this testing. 

The HexArmor Chrome Series 4022 Gloves are designed to be worn either as a single glove solution.

Conditions - This information is designed to aid product selection; assessing the suitability of the gloves for certain tasks are the responsibility of the user/employer. 

APPLICATIONS OF THE HexArmor Chrome Series 4022 Cut RESISTANT GLOVES

The Chrome Series 4022 Gloves are lightweight and flexible safety gloves with optimal cut resistant palm and back of hand/knuckle protection. The gloves protect against cut hazards to the highest level and abrasion resistant to a good level. The Chrome Series gloves are suitable for indoor or outdoor working environments in dirty or clean conditions and protect against oils and grease in mainly dry conditions. The gloves can be used in various industries for a number of different tasks, some of these industries include:

• Construction
• Waste management
• Warehousing, Transport and Logistics
• Engineering and Manufacture
• Glass manufacture and glazing
• Local Authority
• Utility
• Glass/metal/wood handling
• General work
• Maintenance
• Machine repair

SPECIFICATIONS OF The HexArmor Chrome Series 4022 Cut RESISTANT GLOVES

Below is some additional specific information about the Chrome Series 4022 Cut Resistant Gloves.

• EN388 Rating 4521

• Highest cut resistance

• Washable

• Oil resistant synthetic leather palm coating

• SuperFabric reinforced knuckle protection

• Comes in five size options (sizing options and advice are below)

• Gloves should be stored in dry conditions

• When stored gloves will not suffer in mechanical properties for up to five years from the date of manufacture

• The life of the gloves is difficult to estimate, it depends completely on application and responsibility of the user

• Velcro adjuster on wrist to tighten glove at wrist

• Tested in accordance with EN 388

• Medium level of dexterity

• Medium level of grip

SIZING INFORMATION

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

SAFETY WARNING

Please note - This product should not be used with moving or serrated blades.

Please note - The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use. 

Documentation for the HexArmor Chrome Series 4022 Cut Resistant Gloves

Conformity Statement	Instructions for Use

Ask A Question About This Product

If you would like further information about this product please get in touch with us - we're here to help.

You can contact the Safety Gloves Customer Care Team by email using the form below. A member of the Team will respond to you personally as soon as they can.

Alternatively, you can get in touch by telephone on 020 7501 1104. Our offices are open between 09:00 and 17:00, Monday to Friday (excluding Bank Holidays).

Your Name:	*
Your Email Address:	*
Your Message:	*
	*
	Please add the two numbers

Send Your QuestionSend Your Question

We look forward to helping you with your enquiry.

Delivery

This item will be dispatched by 1st Class Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Please contact our Customer Care Team on 020 7501 1104 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.