HexArmor GGT5 Gator Grip 4020X Gloves
Made with high-performance materials, the HexArmor GGT5 Gator Grip 4020X Gloves are engineered to provide industry leading cut, puncture, and impact protection. The HexArmor GGT5 Gator Grip 4020X Gloves solve the biggest safety challenges faced by oil and gas workers by focusing on the major injury points - finger pinching, severe cuts, abrasions, and crush injuries. These safety gloves also benefit from a senior level of grip capability designed to cope with wet, grease and similar situations.
Main Features of the HexArmor GGT5 Gator Grip 4020X Gloves
The HexArmor GGT5 Gator Grip 4020X Gloves are made with SuperFabric brand material for the highest cut resistance protection; EN388 Cut Level 5.
The superior grip on the HexArmor GGT5 Gator Grip 4020X Gloves prevents the formation of oil film and displaces oil allowing maximum contact with tools and other surfaces in saturated situations.
The soft padding and superior grip covering the back of the hand on the HexArmor GGT5 Gator Grip 4020X Gloves protects the area, as seen below:
The HexArmor GGT5 Gator Grip 4020X are designed for maximum visibility. Use of florescent yellow and green and a reflective silver badge on the cuff increase the visibility of the gloves when dropped or when being used in poorly lit environments.
The HexArmor GGT5 Gator Grip 4020X comes with enhanced impact protection.
specifications of the HexArmor GGT5 Gator Grip 4020X Gloves
- SuperFabric brand palm provides ISEA (International Safety Equipment Association) and CE (European Union Certified) Level 5 cut resistance.
- Full Impact Exoskeleton with high performance IR-X protects against blows to the hand.
- The highest quality materials with double-stitched seams for ultimate durability.
- Specialised grip prevents formation of oil film and displaces oil, allowing maximum contact with tools.
- Abrasion-resistant TP-X on wear points which also helps to maintain grip.
- Industrial puncture resistance protects hands from wickers, burns and wire cables.
- Reinforced index finger and thumb saddle help extend glove life.
- Breathable SlipFit cuff provides a secure, comfortable fit.
- Hi-Vis colour scheme increases visual awareness.
testing of the hexarmor ggt5 gator grip 4020X gloves
The HexArmor GGT5 Gator Grip Gloves 4020X have been tested in accordance to EN 388:2003 to determine their level of mechanical protection. The HexArmor GGT5 Gator Grip Gloves 4020X score a rating of 4542 which is explained in the table below:
|Hazard ||Resistance Rating |
|Abrasion Resistant ||4 |
|Cut Resistant ||5 |
|Tear Resistant ||4 |
|Puncture Resistant ||2 |
All sizes of the HexArmor GGT5 Gator Grip Gloves 4020X comply with the EN 420:2003 test for comfort and fit and dexterity. Per customer recommendations, these gloves have been manufactured with a tighter fit in order to increase dexterity. The glove length is appropriate for their intended use.
Tested in accordance with Clause 6.4 of EN 388:2003. These gloves have an ANSI Puncture rating of Level 3.
The HexArmor GGT5 Gator Grip Gloves 4020X have been successfully tested and passed in the following:
- BS EN 420:2003 + A1: 2009 (colour fastness to perspiration requirements of EN 340:2003).
- BS EN 14362:2003 part 2 Determination of certain Azo colourants in Textiles (with extraction).
- EN 340:2003 clause 4.2 Innocuousness - Paragraph D. Colour fastness perspiration.
Applications for the hexarmor ggt5 gator grip 4020x gloves
The HexArmor GGT5 Gator Grip 4020X Gloves have been designed with specialised grip capability to meet the high demands faced in the oil and gas industry. This specialisation makes these gloves well suited to a number of tasks and jobs that depend heavily on the ability to grip. The HexArmor GGT5 Gator Grip 4020X Gloves are recommended for the following:
- Waste Management
- Warehousing, Transport and Logistics
- Local Authority
- Engineering and Manufacture
- Glass Manufacture and Glazing
- Oil and Gas
Please note - this list is not exhaustive, the HexArmor GGT5 Gator Grip 4020X Gloves are well suited to a number of other tasks and industries.
| || || |
In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand.
We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres.
Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.
|Glove Size ||7/S ||8/M ||9/L ||10/XL ||11/XXL |
|Measurement across palm ||7cm ||8cm ||9cm ||10cm ||11cm |
|Product Code ||HEX4020/S ||HEX4020/M ||HEX4020/L ||HEX4020/XL ||HEX4020/XXL |
FIBER CONTENT OF THE HEXARMOR GGT5 GATOR GRIP 4020X GLOVES
Shell: 54% Nylon, 15% Neoprene, 13% Polyurethane, 5% Plastic, 4% Polyester, 3% EVA Foam, 3% PVC, 1% Silicone, 1% Spandex, 1% Cotton
Thermal plastic rubber
Liner: 100% Cotton
The HexArmor GGT5 Gator Grip 4020X Gloves are latex free.
The products are manufactured under a quality system. None of the raw materials or processes used in the manufacture of these products is known to have any harm on the wearer.
This product is cut and puncture resistant but not cut and puncture proof. Do not use with moving or serrated blades or tools. Always conduct a safe test to make sure it is suited for your uses.
The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.
Additional information on the HexArmor GGT5 Gator Grip Gloves 4020X
HexArmor is a registered trademark of Performance Fabrics, Inc. SuperFabric is a registered trademark of HDM, Inc.
Protected by patents and patents pending.
Markings on the HexArmor GGT5 Gator Grip Gloves 4020X: Name of manufacturer; model number; size; CE mark; EN 388:2003 pictogram; "book" symbol; product name.
Please find the conformity statement for these gloves by clicking the PDF link below.