HexArmor Rig Lizard Arctic 2023 Hi Vis Mechanics Style Thermal Gloves
The HexArmor Rig Lizard Arctic 2023 Hi Vis Mechanics Style Thermal Gloves are built with thermal resistance and industry leading impact protection to combat the elements and keep hands warm and operational.
These safety gloves understand that your hands are the most important tool in your job. Cold weather can lead to a loss in feeling and facility, resulting in a serious threat to your hand safety. the challenge met by the HexArmor Rig Lizard Arctic 2023 Hi Vis Mechanics Style Thermal Gloves is producing a waterproof and thermal resistant glove whilst preserving the dexterity of the Rig Lizard 2021.
The product code for these gloves is HEX2023.
Main Features of the HexArmor Rig Lizard Arctic 2023 Hi Vis Mechanics Style Thermal Glove
Protection From The Cold
Dynamic combination of Hipora and C40 Thinsulate interior liners for waterproofing and cold resistance.
Durable TP-X palm utilises the highest level abrasion resistance while maintaining oil resistance grip.
Unrivalled Impact Protection
Full impact resistant exoskeleton with high performance IR-X smash guards provides greater impact protection. Additional IR-X guard between thumb and index finger secures common pinch and catch points.
Reinforced index finger and thumb crotch extends glove life. Exterior seams implement a double-stitched core-spun thread, adding further durability and longevity.
Breathable SlipFit neoprene cuff adds comfort and convenience. Synthetic palm with unique stitching pattern offers unrivalled comfort and dexterity.
High Visibility Gloves
High Visibility colour scheme increases visual awareness.
Highest level of abrasion and tear resistance as defined by European Standards EN 388.
Testing Of The HexArmor Rig Lizard Arctic 2023 Hi Vis Mechanics Style Thermal Gloves
EN 388:2003 - Resistance to Mechanical Hazards
The HexArmor Chrome Series Mechanics Cut Resistant Gloves have been tested in accordance to EN 388:2003 to determine their level of mechanical protection. The HexArmor Rig Lizards score a rating of 4244 which is explained in the table below:
|Hazard ||Resistance Rating |
|Abrasion Resistant ||4 |
|Cut Resistant ||2 |
|Tear Resistant ||4 |
|Puncture Resistant ||4 |
Applications For The HexArmor Rig Lizard Arctic 2023 Hi Vis Mechanics Style Thermal Gloves
- Waste Management
- Warehousing, Transport and Logistics
- Local Authority
- Engineering and Manufacture
- Oil and Gas
- Offshore gas
- Oil refining
- Petroleum industries
- General Work
- Machine Repair
- Hydraulic fluid
Please note - this list is not exhaustive, the HexArmor Rig Lizard 2023 Gloves are well suited to a number of other tasks and industries.
Sizing Information On The HexArmor Rig Lizard Arctic 2023 Hi Vis Mechanics Style Thermal Gloves
| || || |
In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand.
We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres.
Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.
|Glove Size ||7/S ||8/M ||9/L ||10/XL ||11/XXL |
|Measurement across palm ||7cm ||8cm ||9cm ||10cm ||11cm |
|Product Code ||HEX2023/S ||HEX2023/M ||HEX2023/L ||HEX2023/XL ||HEX2023/XXL |
This product is cut and puncture resistant but not cut and puncture proof. Do not use with moving or serrated blades or tools. Always conduct a safe test to make sure it is suited for your uses.
The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.
Documentation for the HexArmor Gloves
|Conformity Statement ||Instructions for Use |
| || |