UCi KoolGrip Arctic Thermal Dual Latex Coated Gloves

(1 Review)
Size 7
Size 8
Size 9
Size 10
£4.96
(£5.95 Inc. VAT)
+
  • Thick thermal insulated and waterproof gloves
  • Suitable for cold environments and foul weather work
  • Contact cold tested to level 1 and heat level 2 (up to 250°C)
  • Price shown is per pair of gloves
FREE UK delivery

On all orders of £40 and above.

Buying in bulk?

Find out about purchase orders.

Got a question?

Get in touch with our sales team.

Information

UCi KoolGrip Arctic Thermal Dual Latex Coated Gloves

The UCi KoolGrip Arctic Thermal Dual Latex Coated Gloves feature excellent insulating capacities to keep your hands warm in cold environments, perfect for working outdoors in the winter. These gloves are waterproof, windproof and dirt-proof, maintaining excellent grip in all kinds of foul weather conditions. They ensure to retain user safety whilst handling tools and materials in a range of general purpose industries.

What Size Should I Choose?

The KoolGrip Arctic Latex Coated Gloves are available in four different sizes, so that you can find the size that best fits you. To find your size, measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together as seen in the image below.

Indications of Where to Measure Your Hand

Size Circumference (mm) Length (mm) Min. Length of Gloves (mm)
Size 7 178mm 171mm 230mm
Size 8 203mm 182mm 240mm
Size 9 229mm 192mm 250mm
Size 10 254mm 204mm 260mm

How Can the Dual Thermal Gloves Protect Me at work?

These gloves feature thick thermal brushed 10 gauge terry acrylic liner with great insulating capacities to keep your hands warm in cold environments. We recommend these gloves for general use outdoor applications, including the following:

  • Building and construction
  • Highways
  • Maintenance
  • Oil
  • Gas and mining
  • Railways

How Much Grip Will These Gloves Retain?

These thermal work gloves feature a full single coating with an extra 3/4 knuckle grip coating, which has excellent water resistance. This ensures to maintain a great level of grip despite the weather. As the KoolGrip Dual Latex Coated Gloves are designed for manual outdoor work, they will maintain great grip and dexterity when holding various tools and materials, despite their thermal properties.

What Happens if the Thermal Dual Gloves Get Wet or Dirty?

The KoolGrip Arctic Thermal Gloves will get wet and dirty, as that's their job! These gloves combine a first full flat latex coating with a soft foam latex knuckle coating for a waterproof, windproof and dirt-proof finish, protecting your hands in all types of foul weather conditions.

Why Should I Choose the KoolGrip Latex Coated Gloves?

These gloves have a range of qualities that make them ideal for use in outdoor work, including the following:

  • Heat tested
  • High visibility
  • Superior grip
  • Water repellence
  • Waterproof
  • Contact heat level 2 (up to 250°C)
  • Contact cold level 1

Why Should I Trust The Koolgrip Arctic Thermal Gloves?

These gloves are ideal for working in cold weather. In fact, they are backed by a regulatory body, adhering to EN 388 (mechanical protection), EN 407 (heat resistance) and EN 511 (protection from the cold). See below for further details:

EN 388

Property Resistance Level
Abrasion Resistance Level 1
Cut Resistance Level 2
Tear Resistance Level 4
Puncture Resistance Level 1

EN 407

Property Resistance Level
Burning Behaviour Level 0
Contact Heat Level 2
Convective Heat Level 0
Radiant Heat Level 0
Small Splashes Molten Metal N/A
Large Quantity Molten Metal N/A

EN 511

Property Resistance Level
Convective Cold Resistance Level 0
Contact Cold Resistance Level 1
Water Permeability Level 1

What Are the Latex Thermal Gloves Made of?

These KoolGrip gloves are made from:

  • Flat latex coating
  • Soft foam latex knuckle coating
  • Brushed 10 gauge terry acrylic liner

Documentation for the Koolgrip Arctic Thermal Dual Latex Coated Gloves

Conformity Statement (EU Regulation) Product Data Sheet
Download the Conformity Statement for the Ejendals Tegera 295 Download the Instruction Manual for the Ejendals Tegera 295
Delivery

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order ValueUK Delivery Charge
Up to £39.99£4.95
£40.00 and overFREE

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.

What is EN 511?

What is EN 511?

You might have noticed that this product adheres to EN standard EN 511. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 511. EN 511 stands for all things cold, and means that your gloves have been tested for their convective cold resistance, contact cold resistance and water permeability properties.

How Do I Read the EN 511 Score?

Simply speaking, the higher the score achieved the better the product will be at resisting the hazard tested. For the first two tests (convective cold resistance and contact cold resistance), the product will achieve between a Level 0 and a Level 4. The higher the score the better the resistance, with a Level 0 score meaning that it failed and an N/A score meaning that the product wasn’t tested for this hazard.

For water permeability the product will achieve either a Level 0 or a Level 1. Level 1 means that the product is waterproof, and Level 0 means that it isn't.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 511 so you know where you are standing. For further information, you can see the Introductory EN 511 Blog in our Knowledge Centre.

What is EN 407?

What is EN 407?

You might have noticed that this product adheres to EN standard EN 407. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 407. EN 407 stands for Protective Gloves Against Thermal Risks, and informs you of your gloves' resistance to burns, contact heat, convective heat, radiant heat and small and large splashes of molten metal.

How Do I read the EN 407 Score?

Reading your EN 407 score is simple, as each hazard will be provided with a score between Level 0 and Level 4. Level 0 means the gloves failed against that particular hazard, and Level 4 means that they provide the best protection possible against that hazard.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 407 so you know where you are standing. For further information, you can see the Heat Safety Introductory Blog that introduces EN 407 in a simple, easy to read article.

Reviews

Write a Review and share your opinions!
1 Review:

work well
Rating:
02 August 2022  | 

They do the job.

 
Was this helpful to you?  Yes  /  No

Customers also bought