Ansell Nitrotough N250B 3/4-Dipped Nitrile-Coated Gloves

The Ansell Nitrotough N250B​ 3/4-Dipped Nitrile-Coated Gloves are abrasion-resistant, oil-repellent safety gloves suitable for medium-risk applications, including metal fabrication, textile manufacture and shipping and receiving. Thanks to their low-linting nature, these gloves are also suitable for appliance manufacture and automotive assembly.

Composition of the Ansell Nitrotough N250B Gloves

The N250B Gloves are made from pure cotton for maximum breathability and optimum user comfort, and are coated with nitrile across 3/4 of the glove surface area for durability and protection against oil and abrasion.

Key Features and Benefits of the Nitrotough N250B Nitrile-Coated Gloves

• Nitrile-coated gloves with 100% cotton knit liner
• Three-quarter nitrile-dipped finish 
• Comfortable and adaptable due to stretchy coating
• Suitable for textile and appliance manufacture
• Low-linting to protect handled parts
• Ventilated back to keep hands cool
• Oil-repellent design, ideal for improved handling

Stretchy Nitrile Coating

The N250B Gloves consist of a cotton liner with a nitrile coating covering 3/4 of the glove surface area. This coating is stretchable, which enhances user comfort and provides excellent dexterity for component handling, assembly and an array of other manual tasks.

Low-Linting Gloves

The Nitrotough N205 Gloves are low-linting to protect the handled parts. This makes them suitable for appliance manufacture, electronics repair and automotive assembly. 

Ventilated For Greater Comfort

The back of the Nitrotough N250B is ventilated to allow for air circulation. This helps to reduce hand perspiration and keep the hands cooler for greater user comfort.

Applications for the Ansell Nitrotough N250B 3/4-Dipped Gloves

The Nitrotough N250B Gloves are suitable for the following applications:

• Appliance manufacture
• Automotive assembly
• Component assembly
• Packaging
• Product inspection
• Metal fabrication
• Shipping and receiving
• Textile manufacture
• Transmission
• Warehousing

Testing of the N250B 3/4-Dipped Nitrile-Coated Gloves

The Nitrotough N250B Gloves meet the following specifications:

• European Directive 89/686/EEC
• EN 420:2003 + A1:2009
• EN 388:2003: 2111

The table below shows the test results of the Nitrotough N205 Gloves according to EN 388 Mechanical Risk specifications.

Sizing of the Nitrotough N205 3/4-Dipped Gloves

These gloves are available in a range of sizes, making them suitable for most users. Please consult the table below for details, then select the required size from the drop-down menu at the top of the page. The gloves have a length of 235-275mm.

Documentation for the N205 3/4-Dipped Gloves

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.