Polyco Capilex General Work Gloves
The Polyco Capilex General Work Gloves are a versatile general purpose glove suitable for a variety of industries from construction to transport and logistics and are suitable for oily conditions too.
The Polyco Capilex General Work Gloves are a seamless nylon glove with a multi-layered nitrile palm coating. This patented multi-layer coating provides excellent wet and dry grip for safe and secure handling and restricts oil penetration.
The Polyco Capilex General Work Gloves are durable and provide good abrasion resistance and protection from scratches and dirt.
Polyco products are engineered and manufactured to provide users with the highest levels of protection in areas where risk is greatest. Polyco products are made and quality control checked to the highest standards and introduce innovation to engineering of safety glove products.
The product code for these gloves is 200.
APPLICATIONS OF THE CAPILEX GENERAL WORK GLOVES
The Capilex Gloves are medium duty safety gloves with optimal abrasion resistance The gloves protect against abrasions, scratches and dirt hazards in the work place. The Capilex Gloves are suitable for indoor or outdoor working environments in dirty or clean conditions and protect against oils and grease. The gloves can be used in various industries for a number of different tasks, some of these industries include:
- Warehousing, Transport and Logistics
- Local Authority
- Engineering and Manufacture
- Component Handling
- General Assembly
- Light Engineering Work
- Machine Operation
- Automotive maintenance and Repair
- Automotive Engineering
MAIN FEATURES OF THE Polyco Capilex General Work GLOVEs
The Polyco Capilex General Work Gloves are made from a seamless nylon liner with a multi-layered nitrile palm coating.
The gloves are breathable and the seamless nylon liner together with the knitted wrist ensures good fit and comfort to the wearer.
Grip and Dexterity
The gloves provide the wearer with a high level of grip and dexterity.
The Capilex General Work Gloves are a Certified Safety Glove, scoring a 4121 in testing. See below for a breakdown of this testing.
|Hazard ||Resistance Rating |
|Abrasion Resistant ||4 (Highly Resistant) |
|Cut Resistant ||1 |
|Tear Resistant ||2 |
|Puncture Resistant ||1 |
The Polyco Capilex General Gloves are designed to be worn either as a single glove solution or as a glove liner.
Conditions - This information is designed to aid product selection; assessing the suitability of the gloves for certain tasks are the responsibility of the user/employer.
SPECIFICATIONS OF The Capilex General Work GLOVES
Below is some additional specific information about the Capilex General Work Gloves.
- Sold in packets of 12 (Pairs)
- EN388 Rating 4121
- Highest abrasion resistance
- Washable (Hand wash) and left to dry naturally (Do not tumble dry)
- Comes in four size options (sizing options and advice are below)
- Gloves should be stored in dry conditions
- When stored gloves will not suffer in mechanical properties for up to five years from the date of manufacture
- The life of the gloves is difficult to estimate, it depends completely on application and responsibility of the user
- Knitted wrist design makes it soft and comfortable to wear
- Tested in accordance with EN 388:2004
- Protects against abrasion, scratches and dirt
| || || |
In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand.
We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres.
Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.
|Glove Size ||7/S ||8/M ||9/L ||10/XL |
|Measurement across palm ||7cm ||8cm ||9cm ||10cm |
|Product Code ||2001 ||2002 ||2003 ||2004 |
Please note - This product should not be used with moving or serrated blades.
Please note - The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use.