Polyco Dyflex Level 3 Cut resistant Gloves

The Polyco Dyflex Level 3 Cut Resistant Gloves provide an excellent level of cut resistance according to CE Standards EN388 Testing. The Polyco Dyflex Cut Resistant Gloves are engineered with a seamless knitted upper with Dyneema technology and a polyurethane coating. The Polyco Dyflex Gloves are lightweight and breathable and are typically used for component handling, assembly and more.

Polyco products are engineered and manufactured to provide users with the highest levels of protection in areas where risk is greatest. Polyco products are made and quality control checked to the highest standards and introduce innovation to engineering of safety glove products.

The product code for these gloves is 882.

Main Features of the Polyco Dyflex Cut Resistant Gloves

The Materials - The Polyco Dyflex Gloves are engineered and made with a knitted upper and a polyurethane palm coating which allows it to give incredible protection against blade cuts and abrasion.

Grip - The grip of the Dyflex Gloves consists of a polyurethane palm coating which channels oil and liquids away from the surface of the gloves. This design optimises the grip to allow for safe handling while in oily or greasy working environments in both wet and dry conditions. The polyurethane coating can be seen in the image below.

Comfort and Dexterity - The elasticated knitted wrist ensures a secure fit and protects from dust and dirt getting in over the glove. The glove is designed to be tight fitting for optimal dexterity for tactile operations.

Testing - The Dyflex Gloves are a Certified Safety Glove, scoring a 4343 in testing. The gloves perform well according to CE standards in abrasion, tear and cut resistance testing. See below for a breakdown of this testing. 

The Polyco Dyflex Gloves are designed to be worn as a single glove solution but can be worn as a glove liner if the user deems it necessary.

Conditions - This information is designed to aid product selection; assessing the suitability of the Gloves for certain tasks are the responsibility of the user/employer. 

Applications of the Polyco Dyflex Cut Resistant Gloves

The Dyflex Gloves are lightweight and flexible safety gloves. The Dyflex Gloves are suitable for indoor or outdoor working environments in dirty or clean conditions and protect against oils and grease. The gloves can be used in various industries for a number of different tasks, some of these industries include:

• Construction

• Automotive manufacturing

• Waste management

• Assembly

• Warehousing, Transport and Logistics

• Engineering and Manufacture

• Glass Manufacturing and Glazing

• Local Authority

• Utility

• Component handling

• General assembly

• Electronics

• Tiling

• Ducting/Pipework

• Steel Handling

• Glazing

Specifications of the Dyflex Cut Resistant Gloves

Below is some additional specific information about the Dyflex Cut Resistant Gloves.

• EN388 Rating 4343

• High level of cut, tear and abrasion resistance

• Washable

• Polyurethane palm coating

• Comes in five size options (sizing options and advice are below)

• Gloves should be stored in dry conditions

• When stored gloves will not suffer in mechanical properties for up to five years from the date of manufacture

• The life of the gloves is difficult to estimate, it depends completely on application and responsibility of the user

• Knitted glove upper design makes it soft and comfortable to wear

• Tested in accordance with EN388

• Ideal for tactile operation

• High level of dexterity

• High level of grip

Sizing Information

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

Safety Warning

Please note - This product should not be used with moving or serrated blades.

Please note - The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use. 

Documentation for the Dyflex Gloves

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.