Polyco GL881 Bodyguards New Latex Powder Free Disposable Gloves
The Polyco Bodyguards GL881 New Latex Powder Free Disposable Gloves are made with the highest quality natural latex material making them very strong. The Polyco Bodyguards GL881 New Latex Powder Free Disposable Gloves are left un-powdered to reduce the risk of product contamination. The Polyco Bodyguards GL881 New Latex Powder Free Disposable Gloves have incredibly good grip due to a polymer coating and textured fingertips to provide a light grip, perfect for tactile activities and duties. The gloves provide maximum dexterity, sensitivity and comfort for the wearer making the gloves suitable for pharmaceutical work and duties performed in hospitals and clinics.
The Polyco Bodyguards GL881 New Latex Powder Free Disposable Gloves adhere to the EN455 European standards which make these gloves suitable for single use medical usage.
Applications of use of the Polyco Bodyguards GL881 New Latex Powder Free Disposable Gloves
The GL881 New Latex Gloves are suited to both indoor and outdoor working environments in both wet and dry conditions. They can also be used in clean and dirty working environments depending on industry. Below are some of the typical uses of these gloves.
- Construction
- Waste management
- Automotive
- Medical/Vet/Dental
- Food Manufacturing and Preparation
- Assembly
- Laboratory and Pharmaceutical
- Hair and Beauty
- Electronics
- Inspection
- Local Authority
- Hospital and Clinical
- Care Home Work
Additional Information about the Polyco GL881 New Latex Powder Free Disposable Gloves
- Freedom form holes rating: AQL 1.5
- Rolled cuff for extra strength and prevention of liquid roll back
- Powder free to prevent product contamination
- Textured fingertips which give excellent grip
- Snug fit to aid dexterity
- Excellent grip in both wet and dry conditions
- EN455 rating approved single use medical gloves
Sizing Information Of The Polyco GL871 BODYGUARDS EXTRA GRIP LATEX POWDER FREE DISPOSABLE GLOVES
 | In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes. |
| Glove Size | XS | S | M | L | XL |
| Measurement across palm | 6cm | 7cm | 8cm | 9cm | 10cm |
| Product Code | GL8814 | GL8811 | GL8812 | GL8813 | GL8815 |
Further Information on The Polyco GL881 BODYGUARDS New LATEX POWDER FREE DISPOSABLE GLOVES
The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.
To get the best service from your gloves ensure that after use all contaminant is removed.
Store in dry conditions away from direct sunlight and heat.
You are advised to retain packaging for reference.
These safety gloves should not be worn where there is a risk of entanglement with moving machinery.
Conformity Statement and User Instructions
Please find the conformity statement and user instructions for these gloves by clicking the PDF link below.
