Polyco Granite 5 Beta Dry Leather Cut Resistant Gloves

The Polyco Granite 5 Beta Dry Leather Cut Resistant Gloves are grain leather gloves with reinforced Kevlar seamless knitted lining. They are very versatile and provide excellent protection from cut hazards and other mechanical hazards detailed below. This glove is a version of the Polyco Granite 5 Beta Gloves that have been designed especially for dry environments.

The Polyco Granite 5 Beta Dry Leather Cut Resistant Gloves use double stitch Kevlar thread for maximum strength. The gloves also boast a high level of grip and medium level of dexterity.

Polyco products are engineered and manufactured to provide users with the highest levels of protection in areas where risk is greatest. Polyco products are made and quality control checked to the highest standards and introduce innovation to engineering of safety glove products.

The product code for these gloves is 891D.

APPLICATIONS OF THE Polyco Granite 5 Beta Dry Leather Cut Resistant Gloves

The Polyco Granite 5 Beta Dry Leather Cut Resistant Gloves protect against cut hazards to the highest level and abrasion resistant and puncture to a good level. The Granite 5 Beta Gloves are suitable for indoor or outdoor working environments in dirty or clean conditions. These gloves are also suitable in hot or cold outdoor working environments. The gloves can be used in various industries for a number of different tasks, some of these industries include:

• Waste Management
• Automotive
• Warehousing, Transport and Logistics
• Utility
• Local Authority
• Emergency Services
• Engineering and Manufacture
• Glass Manufacture and Glazing
• Oil and Gas

MAIN FEATURES OF THE Polyco GRANITE 5 BETA LEATHER CUT RESISTANT GLOVES

The Materials - The Polyco Granite 5 Beta Leather Gloves are engineered and made with a high quality grain leather with reinforced Kevlar seamless knitted liner. The Granite Beta Gloves feature an elasticated wrist, reinforced thumb crotch to prevent wear and a protective vein patch and additional leather protection on the back of the cuff. 

Grip and Comfort - The Granite 5 Delta Gloves have a high level of grip and medium level of dexterity. The yarn is made with a soft finish to provide exceptional comfort to the wearer.

Testing - The Granite 5 Beta Gloves are Certified Safety Gloves, scoring a 3534 in testing. The gloves adhere to the highest level of cut resistance according to CE standards as well as performing well in puncture resistance tests. See below for a breakdown of this testing. 

Conditions - This information is designed to aid product selection; assessing the suitability of the gloves for certain tasks are the responsibility of the user/employer. 

SPECIFICATIONS OF The POLYCO GRANITE 5 BETA LEATHER CUT RESISTANT GLOVES

Below is some additional specific information about the Polyco Granite 5 Beta Leather Gloves:

• EN388 Resistance to mechanical hazards Rating 4534
• EN407 Protection against thermal risks rating of 41XXXX
• Highest cut resistance
• Washable
• Reinforced palm, thumb and wrist pads
• Latex free
• Comes in four size options (sizing options and advice are below)
• Gloves should be stored in dry conditions
• When stored gloves will not suffer in mechanical properties for up to five years from the date of manufacture
• The life of the gloves is difficult to estimate, it depends completely on application and responsibility of the user
• Tested in accordance with EN388 and EN407
• Medium level of dexterity
• High level of grip

SIZING INFORMATION

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

SAFETY WARNING

Please note - This product should not be used with moving or serrated blades.

Please note - The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use. 

Documentation for the Granite Beta Dry Gloves

Conformity Statement and User Instructions

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.