Polyco Hot Glove Heat Resistant Gloves
The Polyco Hot Glove Heat Resistant Glove is a heat resistant double layered cotton glove with nitrile grip coating. Achieving Level 2 for contact heat, it can withstand temperatures of up to 250 degrees Celsius providing a high level of protection against heat.
The double layer of knitted cotton also offers a degree of comfort, flexibility and dexterity not normally associated with such protection levels. The safety glove has good tear resistance which enhances its mechanical protection and increases durability and also features a nitrile grip pattern for safer handling. It can be worn on either hand which extends the life of the glove and is designed to have a generous fit, allowing for quick and easy removal when required.
The Polyco Hot Glove Heat Resistant Gloves are available in two lengths, for additional protection to the forearm.
The product code for these gloves is 90. They are also available for purchase in bulk quantity.
Main Features of the Polyco Hot Glove Heat Resistant Gloves
Heat Resistant
The Polyco Hot Glove Heat Resistant Gloves have been tested to Level 2 (up to 250 degrees Celsius), for contact according to European Standard EN 407.
Enhanced Grip
The Polyco Hot Glove Heat Resistant Gloves benefit from a nitrile grip pattern which offers grip for safer handling.
Durability
Double layered cotton for extra protection make the Polyco Hot Glove Heat Resistant Gloves a durable safety glove.
Ambidextrous
The Polyco Hot Glove Heat Resistant Gloves come in pairs but each glove can be worn on either hand, extending the life of the glove.
Testing Of The Polyco Hot Glove Heat Resistant Glove
EN 407 - Protection Against Thermal Risks
EN 407 Test | Performance Level |
Burning Behaviour | 0 |
Contact Heat | 2 |
Convective Heat | X |
Radiant Heat | X |
Small Splashes of Molten Metal | X |
Large Splashes of Molten Metal | X |
EN 388 - Resistance to Mechanical Hazards
EN 388 Test | Performance Level |
Abrasion | 1 |
Blade Cut | 2 |
Tear | 3 |
Puncture | 2 |
Applications for the Polyco Hot Glove Heat Resistant Glove
- Bakery Work
- Food Manufacture
- Oven Applications
- Pressings
- Mouldings
Sizing Information Of The Polyco Hot Glove Heat Resistant Glove
 | In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes. |
Glove Size | 7/S | 9/L |
Measurement across palm | 7cm | 9cm |
Further Information on the Polyco Hot Glove Heat Resistant Gloves
The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.
Can I Wash These Gloves?
Yes, these gloves can be washed. Washing instructions are as follows:
- For best results, machine wash in cold or warm water
- Do not use hot water, as it may shrink the cotton
- Use a normal wash cycle and regular detergent
- Tumble dry on a low setting, then promptly remove the item from the dryer to avoid wrinkles
Conformity Statement
Please find the conformity statement for these gloves by clicking the PDF link below.
Documentation for the Polyco Gloves
Conformity Statement | Instructions for Use |
 |  |