Polyco Nitron Heavy Duty Nitrile Gloves
The Polyco Nitron Heavy Duty Nitrile Gloves are lined with a cotton jersey comfort liner and are coated in a nitrile dip. These heavy duty work gloves provide excellent resistance to abrasion and good resistance to cuts and snags, making them ideal for handling rough objects.
The Polyco Nitron Heavy Duty Nitrile Gloves offer protection against oil and grease whilst also offering comfort with its anatomical shape and cotton lining.
Polyco products are engineered and manufactured to provide users with the highest levels of protection in areas where risk is greatest. Polyco products are made and quality control checked to the highest standards and introduce innovation to engineering of safety glove products.
MAIN FEATURES OF THE Polyco Nitron Heavy Duty Nitrile Gloves
The Materials - The Polyco Nitron Heavy Duty Nitrile Gloves are made with a cotton jersey liner and coated in a heavy duty nitrile dip which provides excellent dry grip.
Comfort and Dexterity - The seamless knitted cotton liner provides exceptional comfort and reduces hand fatigue.
Testing - The Polyco Nitron Heavy Duty Nitrile Gloves are a Certified Safety Glove, scoring a 4221 in testing. The gloves perform well according to CE standards in abrasion and tear resistance testing. See below for a breakdown of this testing.
|Hazard ||Resistance Rating |
|Abrasion Resistant ||4 (Highly Resistant) |
|Cut Resistant ||2 (Quite Resistant) |
|Tear Resistant ||2 (Quite Resistant) |
|Puncture Resistant ||1 |
The Polyco Nitron Gloves are designed to be worn as a single glove solution but can be worn in combination with another glove if the user deems it necessary.
Conditions - This information is designed to aid product selection; assessing the suitability of the Gloves for certain tasks are the responsibility of the user/employer.
APPLICATIONS OF THE POLYCO NITRON HEAVY DUTY NITRILE GLOVES
The Nitron Gloves are suitable for indoor and outdoor working environments in dirty or clean conditions in a mainly dry environment. The gloves can be used in various industries for a number of different tasks, some of these industries include:
- Waste Management
- Warehousing, Transport and Logistics
- Local Authority
- Engineering and Manufacture
- Metal Pressings
- Rough Castings, Fettling
- Building Materials
- Brick, Timber and Concrete Handling
- Refuse collection
- Cable and Couplings
- Heavy Gauge Sheet Metal
- Railway Maintenance
SPECIFICATIONS OF The NITRON HEAVY DUTY NITRILE GLOVES
Extra information on the Nitron Heavy Duty Nitrile Gloves:
- EN388 Rating 4221
- High level of abrasion and tear resistance
- Washable (Low temperature)
- Full nitrile coating or palm coating options
- Comes in three size options (sizing options and advice are below)
- Gloves should be stored in dry conditions
- When stored gloves will not suffer in mechanical properties for up to five years from the date of manufacture
- The life of the gloves is difficult to estimate, it depends completely on application and responsibility of the user
- Tested in accordance with EN388
- High level of dexterity
- High level of grip
- Knitted wrist of safety cuff options available
| || || |
In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand.
We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres.
Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.
|Glove Size ||8/M ||9/L ||10/XL |
|Measurement across palm ||8cm ||9cm ||10cm |
Nitron Fully Coated Knit Wrist
|9401 ||9402 ||9403 |
|Nitron Fully Coated Safety Cuff ||- ||9602 ||9603 |
|Nitron Palm Coated Safety Cuff ||- ||9502 ||9503 |
Please note - This product should not be used with moving or serrated blades.
Please note - The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use.
Documentation for the nitron Gloves
|Conformity Statement ||Instructions for Use |
| || |