Polyco Nitron Plus Heavy Duty General Purpose GLoves - Money Off!

The Polyco Nitron Plus Heavy Duty General Purpose Gloves are sold in packs of pairs. They are heavy duty, nitrile coated on a Kevlar felt liner with nitrile safety cuff.

The Polyco Nitron Plus Heavy Duty General Purpose Gloves provide good cut resistance due to the combination of nitrile and Kevlar felt and also feature good grip.

Please note that these gloves are designed to be a general purpose glove and are not waterproof or chemical resistant. 

Polyco products are engineered and manufactured to provide users with the highest levels of protection in areas where risk is greatest. Polyco products are made and quality control checked to the highest standards and introduce innovation to engineering of safety glove products.

The product code for these gloves is 920. They are also available for purchase in case quantity.

Buy Now While Stocks Last!

The Polyco Nitron Plus Gloves are been updated to a newer style! This means that we're running down stock on our old style to make way for the brand new version. Don't worry it's only the sizing that's been updated, so you're still getting the same fantastic pair of gloves!

APPLICATIONS OF THE POLYCO NITRON PLUS HEAVY DUTY GENERAL PURPOSE GLOVES

The Nitron Plus Gloves are a general purpose work glove which offers excellent cut and abrasion resistance. The Nitron Plus Gloves are suitable for indoor and outdoor working environments in cold, wet, dry and oily  conditions. The gloves can be used in various industries for a number of different tasks, some of these industries include:

• Waste Management
• Engineering and Manufacture
• Glass Manufacture and Glazing
• Oil and Gas

MAIN FEATURES OF THE Polyco Nitron Plus Heavy Duty General Purpose Gloves

The Materials - The Polyco Nitron Plus General Purpose Safety Gloves are engineered and made with a Kevlar felt liner which has been coated in a nitrile layer and offers protection against cuts, snags, punctures, grease and oil.

Grip - The nitrile coating provides a highly grippy surface in mainly dry conditions and provides a medium level of dexterity.

Testing - The Nitron Plus Gloves are a Certified Safety Glove, scoring a 4432 in testing. The gloves performed well in abrasion, puncture and tear resistance tests. See below for a breakdown of this testing. 

These gloves are designed to be worn either as a single glove solution.

Conditions - This information is designed to aid product selection; assessing the suitability of the Gloves for certain tasks are the responsibility of the user/employer. 

SPECIFICATIONS OF The POLYCO NITRON PLUS HEAVY DUTY GENERAL PURPOSE GLOVES

Below is some additional specific information about the Nitron Plus Gloves.

• EN388 Rating 4432
• Washable
• Nitrle coating
• Comes in three size options (sizing options and advice are below)
• Gloves should be stored in dry conditions
• When stored gloves will not suffer in mechanical properties for up to five years from the date of manufacture
• The life of the gloves is difficult to estimate, it depends completely on application and responsibility of the user
• Tested in accordance with EN 388:2004
• Medium level of dexterity
• High level of grip

SIZING INFORMATION

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

SAFETY WARNING

Please note - This product should not be used with moving or serrated blades.

Please note - The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use. 

Documentation for the Nitron Plus Gloves

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.