Polyco Polyflex Safety Gloves
The Polyco Polyflex Safety Gloves provide a good level of abrasion and tear resistance according to CE Standards EN388 Testing. The Polyco Polyflex Safety Gloves are made with a seamless knitted nylon glove with a polyurethane coating.
Polyco products are engineered and manufactured to provide users with the highest levels of protection in areas where risk is greatest. Polyco products are made and quality control checked to the highest standards and introduce innovation to engineering of safety glove products.
The product code for these gloves is 8800G. They are also available for purchase in case quantity.
MAIN FEATURES OF THE Polyco Polyflex Safety GLOVEs
The Materials - The Polyco Polyflex Safety Gloves are engineered and made with a knitted nylon glove and coated in a thin polyurethane layer. The gloves provide a good level of protection against tears and abrasion and lower levels of cut and puncture resistance. Low linting fabric which reduces the risk of contamination.
Comfort and Dexterity - The design of the Polyflex has a seamless nylon knitted liner making it extremely comfortable, and has been left uncoated on the back of the hand to allow the hand to breathe. The polyurethane coating is also very flexible which minimises hand fatigue in prolonged use. Also features a knitted wrist to stop dirt and dust entering the glove and gives a snug fit.
Testing - The Polyflex Gloves are a Certified Safety Glove, scoring a 4142 in testing. The gloves perform well according to CE standards in abrasion and tear resistance testing. See below for a breakdown of this testing.
Hazard | Resistance Rating |
Abrasion Resistant | 4 (Highly Resistant) |
Cut Resistant | 1 (Not recommended) |
Tear Resistant | 4 (Highly Resistant) |
Puncture Resistant | 2 (Quite Resistant) |
The Polyco Polyflex Gloves are designed to be worn as a single glove solution but can be worn as a glove liner if the user deems it necessary.
Conditions - This information is designed to aid product selection; assessing the suitability of the Gloves for certain tasks are the responsibility of the user/employer.
APPLICATIONS OF THE Polyco Polyflex Cut RESISTANT GLOVES
The Polyflex Gloves are suitable for indoor working environments in dirty or clean conditions in a mainly dry environment. The gloves can be used in various industries for a number of different tasks, some of these industries include:
SPECIFICATIONS OF The Polyflex Cut RESISTANT GLOVES
Extra information on the Polyflex Safety Gloves:
-
EN388 Rating 4142
-
High level of abrasion and tear resistance
-
Washable (Low temperature)
-
Polyurethane palm coating
-
Comes in five size options (sizing options and advice are below)
-
Gloves should be stored in dry conditions
-
When stored gloves will not suffer in mechanical properties for up to five years from the date of manufacture
-
The life of the gloves is difficult to estimate, it depends completely on application and responsibility of the user
-
Knitted glove upper design makes it soft and comfortable to wear
-
Tested in accordance with EN388
-
High level of dexterity
-
High level of grip
SIZING INFORMATION
To size this product, measure across the palm.
Glove Size | 7/S | 8/M | 9/L | 10/XL | 11/XXL |
Measurement across palm | 7cm | 8cm | 9cm | 10cm | 11cm |
Product Code | 8800G | 8801G | 8802G | 8703G | 8704G |
SAFETY WARNING
Please note - This product should not be used with moving or serrated blades.
Please note - The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use.
Documentation for the Polyflex Gloves
Conformity Statement | Instructions for Use |
 |  |