Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN

The Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN is a seamless knitted liner made with a composite yarn of Kevlar fibre and steel, with a chrome leather palm. Kevlar fibre has an inherent strength that offers a high cut resistance to weight ratio, delivering exceptional performance. The addition of steel fibre that has been woven into this yarn makes the resulting material even stronger, making these safety gloves ideal for applications requiring higher levels of protection such as glass and sheet metal handling.

Designed with a chrome leather palm with extends to protect the veins at the wrist, the Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN offers excellent grip, especially in wet and oily conditions. This leather patch also acts as a liquid barrier.

The Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN has an elasticated knit wrist ensures a secure fit and keeps hands free from dust and debris. This unique combination of high performance properties make the Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN the ideal solution for many demanding applications.

The Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN are sold as a single pair.

Main Features of the Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN

• Cut resistant Kevlar for maximum protection against cuts and slashes

• Leather palm provides excellent grip in wet and oily conditions and also acts as a liquid barrier

• High durability and great levels of abrasion and tear resistance

• Leather vein patch on wrist for additional protection

• Knitted, elasticated wrist provides a secure fit to the user

Testing Of The Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN

Mechanical Hazards EN 388

Applications for the Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN

• Automotive Manufacturing
• Glass Handling - Wet & Dry
• Sheet Metal Handling
• Handling Stationary Blades
• Ceramics Handling

Sizing Information Of The Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

Further Information on the Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN

To get the best service from your gloves ensure that all contaminant is removed after each use.

Store in dry conditions away from direct sunlight and heat.

You are advised to retain this packaging for reference.

Not suitable for use with irritant, toxic or corrosive chemicals.

The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.

Product Codes

Documentation for the Polyco Touchstone Ultra N Steel And Kevlar Gloves TUN

Conformity Statement and Instructions	Data Sheet

Delivery

This item will be dispatched by 1st Class Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Please contact our Customer Care Team on 020 7501 1104 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.