Portwest A140 Thermal Grip Black and Yellow Gloves
Portwest A140 Thermal Grip Black and Yellow Gloves
Portwest A140 Thermal Grip Black and Yellow Gloves

Portwest A140 Thermal Grip Black and Yellow Gloves

(7 Reviews)
Size 6 (Extra Small)
Size 7 (Small)
Size 8 (Medium)
Size 9 (Large)
Size 10 (Extra Large)
Size 11 (XX-Large)
£1.36
(£1.63 Inc. VAT)
+
  • Offers excellent protection from cold conditions
  • Crinkle latex grip enhances grip in all conditions
  • Palm dipped design increases dexterity and ventilation
  • Price shown is per pair of gloves
FREE UK delivery

On all orders of £40 and above.

Buying in bulk?

Find out about purchase orders.

Got a question?

Get in touch with our sales team.

Information

Portwest A140 Thermal grip Black and Yellow Gloves

With a thermal acrylic liner that enhances warmth in cold conditions and a crinkle latex grip to aid handling, there are not many better thermal gloves available than the Portwest A140 Thermal Grip Black and Yellow Gloves. The gloves are built for extended use in cold conditions, and their extra safe handling abilities make them outstanding in applications such as construction, maintenance and transport.

Mechanical Properties of the  Portwest A140 Thermal Grip Gloves

The Portwest A140 Thermal Grip Gloves offer excellent protection against a wide range of mechanical risks. They have been tested in accordance with EU standards to ensure a high level of performance. Please find the results below:

EN 388

Hazard Level of Resistance
Abrasion Resistance Level 1
Cut Resistance Level 1
Tear Resistance Level 4
Puncture Resistance Level 2

EN 511

Hazard Level of Resistance
Convective Cold Resistance N/A
Contact Cold Resistance Level 1
Water Permeability N/A

Top Pick for Thermal Grip Gloves

The Portwest Thermal Grip Black Gloves A140 are a top pick among thermal gloves because they can keep hands warm and comfortable without restricting dexterity and grip. Their thermal acrylic liner works with a latex crinkle grip that works to enhance grip even in wet and slippery environments. 

Features of the Portwest A140 Gloves

  • Features excellent cold resistant qualities
  • Fitted with a crinkle latex coating that enhances grip
  • Supplied with an acrylic liner that provides good mechanical protection
  • Complies with EN standards EN 388 and EN 511
  • Offers superb abrasion and tear resistance increasing longevity
  • Thin and tight fitting design ensures a secure fit
  • Breathable design prevents hands from becoming too hot
  • Seamless design increases comfort during use
  • Available in a wide range of sizes and colours
  • Touchscreen compatible for using with tablets and phones

Suitable for a range of industries

The Portwest Thermal Black Gloves offer exceptional versatility, and are useful in any industry where protection from the cold is required. They are suitable for use inside and outside, in dry, wet and oily conditions and in dirty and clean environments. Some applications where these gloves are recommended include:

  • Assembly
  • Automotive
  • Builders
  • Construction
  • Cold store
  • DIY
  • Heat gloves
  • Industrial work
  • Local authorities
  • Maintenance
  • Mechanics
  • Metal handling
  • Outdoor work
  • Packaging
  • Packing
  • Product inspection
  • Railway maintenance
  • Refuse collection
  • Scaffolding
  • Transport
  • Utilities

Product Codes

The codes for the Portwest Thermal Gloves

  • A140BKRXS
  • A140BKRS
  • A140BKRM
  • A140BKRL
  • A140BKRXL
  • A140BKRXXL

Sizing of the Portwest Thermal Grip Black Gloves

The Portwest A140BK are available in six sizes that should be suitable for most users. To find your perfect pair, please measure the circumference and length of your palm and match the results to the table below.

Glove Size Palm Circumference Palm Length Min. Length of Glove
6 (Extra Small) 152mm 160mm 220mm
7 (Small) 178mm 170mm 230mm
8 (Medium) 203mm 182mm 240mm
9 (Large) 229mm  192mm 250mm
10 (Extra Large) 254mm 204mm 260mm
11 (XX-Large) 279mm 215mm 270mm

Documentation for the Portwest Thermal Gloves

Conformity Statement Instructions for Use
Download the Conformity Statement for the Portwest A140 Download the Instruction Manual for the Portwest A140
Delivery

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order ValueUK Delivery Charge
Up to £39.99£4.95
£40.00 and overFREE

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.

Reviews

Write a Review and share your opinions!
7 Reviews:

Gloves
Rating:
22 November 2021  | 

Excellent gloved

 
Was this helpful to you?  Yes  /  No

Port west
Rating:
26 June 2021  | 

Portwest safety gloves very good value I have been using these type of gloves for over 10 years.

 
Was this helpful to you?  Yes  /  No

Good quality product
Rating:
10 January 2021  | 

Have used these before and had no hesitation in ordering more. Great product at a reasonable price.

 
Was this helpful to you?  Yes  /  No

Portwest A140 Thermal Grip Black and Yellow Gloves
Rating:
06 January 2021  | 

Great 4 working in a freezer came really quick and packaged well

 
Was this helpful to you?  Yes  /  No

Great Product, Great Price
Rating:
18 November 2020  | 

These gloves are excellent quality for Construction at a great price. Delivery was quick and on time. I would recommend.

 
Was this helpful to you?  Yes  /  No

Gloves
Rating:
06 October 2020  | 

Good service and price would recommend

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Great Service.
Rating:
11 April 2020  | 

Simple transaction and great service.

 
Was this helpful to you?  Yes  /  No

Customers also bought