Towa Exxoguard EG3-351 Impact Protection Gloves
 Towa Exxoguard EG3-351 Impact Protection GlovesTowa Exxoguard EG3-351 Impact Protection Gloves 

Towa Exxoguard EG3-351 Impact Protection Gloves

Glove Size:  
Price shown is excluding VAT at 20%.  (£16.75 Inc. VAT)
  • Price is per pair
  • Ten-gauge seamless Kevlar and stainless steel fibre liner
  • Pads on the backs of your hands protect against impact
  • Provides maximum resistance to cuts and tears
Full Details...

Brand:  Towa
Level of Cut Resistance:  5

Free UK Delivery


When you spend £40 or more - click here

Buying in Bulk?


Find out about purchase orders & wholesale

Ask an Expert?


Get in touch with our safety gloves experts

Related Products

Towa Exxoguard EG3-351 Impact Protection Gloves

If your hands are often subject to impact, it's integral that you protect them to reduce your chances of becoming injured. The Towa Exxoguard EG3-351 Impact Protection Gloves have been designed with thermoplastic rubber (TPR) pads on the backs of your thumbs, fingers, knuckles and hands to protect you from impact. The gloves' ten-gauge seamless Kevlar and stainless steel fibre liner also provide maximum resistance to cuts and tears.

These gloves are yellow and blue in colour. The product code is EG3-351.

Physical Resistance of the Exxoguard Protective Gloves

The Towa EG3-351 Gloves have been tested to EN 388, which is the European standard that gauges a glove's resistance to a range of physical threats. Please see the table below for a breakdown of the results.

Mechanical Risk Resistance Level
Abrasion Level 3
Cut Level 5
Tear Level 4
Puncture Level 3

Protection from Thermal Hazards

The Exxoguard Impact Protection Gloves conform to EN 407, which is the European standard for gauging the degree to which the gloves are resistant to thermal hazards. Please find a breakdown of the gloves' results below.

Thermal Risk Resistance Level
Flammability  N/A
Contact Heat Level 2
Convective Heat N/A
Radiant Heat N/A
Small Splashes of Molten Metal N/A
Large Splashes of Molten Metal N/A

Key Features and Benefits

  • Provides maximum all-round protection
  • Kevlar and steel liner for enhanced cut protection
  • TPR pads provide impact protection
  • Pads are located on the backs of your thumbs, fingers, knuckles and hands
  • Kevlar patch reinforces thumb crotch
  • Kevlar stitching for improved strength and durability in high-wear areas
  • Maximum cut and tear resistance
  • Ten-gauge seamless Kevlar and stainless steel fibre liner
  • Ergonomic design for maximum comfort and minimum hand fatigue

Applications of the Latex-Coated Gloves

The Exxoguard EG3-351 Gloves provide excellent all-round protection. As a result of this, they're suitable for a wide range of applications, including the following:

  • Building
  • Construction
  • Glass Handling
  • Mining
  • Sheet Metal Handling
  • Shipping Handling
  • Timber Handling

Sizing of the Exxoguard Gloves

The Impact Protection Gloves are available in four different sizes to ensure they're as comfortable as possible. Please refer to the measurements below to find the gloves that are most suited to your needs.

Glove Size Palm Circumference (mm) Palm Length (mm) Total Minimum Length of Glove (mm)
Size 8 (Medium) 203mm 182mm 240mm
Size 9 (Large) 229mm 192mm 250mm
Size 10 (Extra Large) 254mm 204mm 260mm
Size 11 (XX-Large) 279mm 215mm 270mm

Documentation for the Exxoguard Gloves

Conformity Statement Instructions for Use
Download the Conformity Statement Download the Instruction Manual


This item will be dispatched by 1st Class Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

However, during the Coronavirus crisis, please note that our dispatch times are extended due to unprecedented demand for our products. Please allow an additional 5 working days for dispatch of your order. 

Our team are working hard to process orders as quickly as possible. We would like to thank you for your patience and understanding during this challenging time.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value UK Delivery Charge
Up to £39.99 £4.95
£40.00 and over FREE

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.

Customer Reviews

Be the first to Write a Review for this item!