TraffiGlove TG350 3 Digit Polyurethane Cut Level 3 Handling Gloves

The TraffiGlove TG350 3 Digit Polyurethane Cut Level 3 Handling Gloves are flexible and lightweight, ideal for use in dry conditions.

With 3 fingers exposed for excellent dexterity and a close, comfortable fit ensure the gloves do not restrict the hands making the TraffiGlove TG350 3 Digit Polyurethane Cut Level 3 Handling Gloves the perfect choice for most general handling tasks. The ends of the gloves are factory sealed to eliminate the chance of any loose threads.

Main features of the TraffiGlove TG350 3 Digit Polyurethane Cut Level 3 Handling Gloves

With a seamless knitted high performance, cut resistant thread liner, the TraffiGlove TG350 3 Digit Polyurethane Cut Level 3 Handling Gloves also feature a polyurethane coating to the fingertips and palm to protect the area, the coating is also breathable ensuring comfort during wear. Polyurethane provides good grip in dry conditions and allows excellent dexterity for awkward tasks. The coating also protects against the penetration of dirt for long lasting wear.

The TraffiGlove TG350 3 Digit Polyurethane Cut Level 3 Handling Gloves feature a high abrasion and tear resistance and meet the requirements of EN388 Cut Level 3.

Testing of the Traffiglove tg350 3 dIGIT polyurethane cut level 3 handling gloves

Applications for the TraffiGLOVES TG350 2 dIGIT POLYURETHANE CUT LEVEL 3 HANDLING GLOVES

• Mechanical and electrical trades
• Carpentry
• Maintenance
• Second fix installation works
• Ceiling fixing
• Cladding
• Precision trades

SIZING INFORMATION ON THE TRAFFIGLOVE TG50 digit POLYURETHANE CUT LEVEL 3 HANDLING GLOVES

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

FURTHER INFORMATION ON THE TRAFFIGLOVES TG350 3 Digit POLYURETHANE CUT LEVEL 3 HANDLING GLOVES

The TraffiGloves TG350 3 Digit Polyurethane Cut Level 3 Handling gloves are supplied in pairs or in a pack of 10. 

Documentation

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.