TraffiGlove TG5220 3 Digit Cut Level 5 Safety Gloves

  (1 Review)
Glove Size:  
£4.99
Price shown is excluding VAT at 20%.  (£5.99 Inc. VAT)
  • Cut-resistant gloves with three exposed fingertips
  • Suitable for mechanical and electrical trades
  • Close-fitting design aids hand movement
  • Price is per pair of gloves
Full Details...

Brand:  TraffiGlove
Glove Type:  Reusable
Environment:  Dry

Free UK Delivery

link

When you spend £40 or more - click here

Buying in Bulk?

link

Find out about purchase orders & wholesale

Ask an Expert?

link

Get in touch with our safety gloves experts

Related Products

TraffiGlove TG5220 3 Digit Cut Level 5 Safety Gloves

The TraffiGlove TG5220 3 Digit Cut Level 5 Safety Gloves are ideal for use in mechanical and electrical trades. Their lightweight and close-fitting design enables hands to move freely, and three exposed fingertips provide additional dexterity.

Who Can Use the TraffiGlove TG5220 Gloves?

The TraffiGlove TG5220 Gloves feature three exposed fingertips for improved dexterity, while the polyurethane coating offers excellent grip in dry conditions. Close fit and high tear and abrasion resistance make them a good choice for a range of tasks, including:

  • Automotive
  • Building and construction
  • Engineering
  • Logistics
  • Manufacturing
  • Oil and gas
  • Utility
  • Warehousing
  • Waste, recycling and local authority

EN 388 Rating for the TraffiGlove TG5220 Gloves

The EN 388 ratings of the TraffiGlove TG5220 Gloves are:

Resistance Resistance Level
Abrasion Resistance 4
Cut Resistance X
ISO Cut Resistance C
Tear Resistance 4
Puncture Resistance 3

What Is EN 388?

EN 388 stands for Mechanical Resistance, and informs you of the resistance of the gloves to abrasion, cuts, tears and punctures. Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see X written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Key Features of the TG5220 Gloves

  • Three digit design for further dexterity
  • Maximum abrasion, cut and tear resistance
  • Lightweight and comfortable
  • Durable polyurethane (PU) coating
  • Close-fitting knit wrist
  • Conform to EN 388

Comfortable Design

To give your hands the highest level of comfort while still ensuring you have received protection, the TG5220 Gloves feature a lightweight and close-fitting design, enabling freer and easier hand movement. A soft nylon liner provides even more comfort.

Exposed Fingertips

Three exposed fingertips on the TG5220 Gloves provide additional dexterity. This is vital for enabling you to perform fine product assembly tasks with ease.

Durable X-Dura PU Coating

To help you get the most from them, the TG5220 3 Digit 5 gloves feature an X-Dura PU coating, giving them a fantastic level of durability. This enables you to work with these gloves for longer than with other safety gloves.

How Does the Colour-Coded Traffisafe System Work?

Traffiglove gloves operate on the TraffiSafe system, designed to make it as easy as possible to identify the gloves you may need for a particular task.

  • Red gloves feature a cut level of 1, designed to provide very basic cut resistance and should not be used in environments where cut resistance may be needed.
  • Orange gloves feature a cut level of 3, designed to provide an intermediate level of cut resistance and should only be used in environments where cut resistance is infrequently required.
  • Green gloves feature a cut level of 5, providing the best level of cut resistance possible and are suitable for use where cut resistance is repeatedly required.

Sizing for the TraffiGlove TG5220 3 Digit Cut Level 5 Safety Gloves

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture, then consult the table below. We would recommend using a tape measure or ruler to get the right measurement.

Sizing Guide

Size Measurement Across Palm (mm)
Size 6 60mm
Size 7 70mm
Size 8 80mm
Size 9 90mm
Size 10 100mm

Documentation for the TraffiGlove TG5220 3 Digit Cut Level 5 Safety Gloves

Conformity Statement Instructions for Use
Conformity Statement Instructions for Use

Delivery

This item will be dispatched by 1st Class Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

However, during the Coronavirus crisis, please note that our dispatch times are extended due to unprecedented demand for our products. Please allow an additional 5 working days for dispatch of your order. 

Our team are working hard to process orders as quickly as possible. We would like to thank you for your patience and understanding during this challenging time.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Order Value UK Delivery Charge
Up to £39.99 £4.95
£40.00 and over FREE

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.

Customer Reviews
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Excellent Service
Thursday, 31 October 2019  | 

Really fast and efficient service, really impressed.

Was this helpful to you?  Yes  /  No

This review has not been appraised.