UCi Kutlass Ultra-SN Cut Level F Nitrile-Coated Grip Gloves (Grey/Black)
Designed to deliver the maximum level of protection, the UCi Kutlass Ultra-SN Cut Level F Nitrile-Coated Grip Gloves (Grey/Black) are a superior hand protection choice. They combine level F cut-resistant yarn with textured nitrile-coated palms, shielding against multiple mechanical hazards. They're also crafted for lasting comfort, with a soft yarn-blended liner and open-back design for breathability.
What's Included?
Find the Right Size for You
The UCi Kutlass Ultra-SN Gloves are available in a choice of sizes. To find your correct size please measure the circumference of your palm and length of your hand as shown in the diagram below, and match your results to the table.
.png "Measure the circumference and length of your hand as shown")
| Size | Palm Circumference | Hand Length |
|---|
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
| Size 11 | 279mm | 215mm |
How Do the Ultra-SN Cut Level F Gloves Protect My Hands?
Combining the highest level of cut resistance with a nitrile palm coating, these gloves are able to withstand the toughest tasks while shield your hands against dangerous and slippery objects. They also have a dexterous design, allowing for unrestricted movement and tactile sensitivity needed for more intricate tasks.
For guaranteed protection, they've been tested in accordance with EN 388 to determine their mechanical resistance. The results can be found in the table below.
Tested to EN Safety Standards
- EN 388 (Mechanical Resistance): 4X42F
| Hazard | Resistance Level |
|---|
| Abrasion | Level 4 |
| Cut | N/A |
| Tear | Level 4 |
| Puncture | Level 2 |
| Blade Cut | Level F |
Read our guide to EN 388 for more information.
Key Features and Benefits
- Cut level F yarn liner provides maximum level of cut resistance
- Nitrile-coated palms have a sandy texture for an excellent grip
- Thumb reinforcements help to extend glove lifespan by 30%
- Anatomical design moulds to hands for dexterity and reduced fatigue
- Ideal for handling sharp, wet and oily objects
- Open-back design increases breathability and comfort
- Four-yarn blended liner is soft for comfort over extended periods
- OEKO-TEX-certified, meaning it is safe for your skin
- Complies with EN 388 safety standard for guaranteed protection
Where Can the UCi Kutlass Nitrile-Coated Gloves Be Used?
Suitable applications and sectors include (but aren't limited to):
- Automotive tasks
- Engineering
- Construction/Building
- Logistics
- Warehousing
- Glass handling
- Machine operation
- Mechanics
- Maintenance/Repairs
- Oil and gas work
Are These Gloves Comfortable?
There's no question that these gloves offer unparalleled levels of protection, but they're also designed for your comfort. Their four-yarn blended liner is soft and comfortable against the skin, and their open-back design allows for a constant flow of air to your hands.
They're also certified to the OEKO-TEX standard, meaning they're made without harmful chemicals and substances that could cause skin irritation.
Cost-Effective Hand Protection
Crafted with reinforcements in the thumb region, the UCi Kutlass Ultra-SN Gloves are designed to withstand frequent use with little risk of becoming damaged. This can save you money in the long run, as you won't need to make frequent replacements.
Documentation
Delivery
This item will be dispatched by Royal Mail, DPD courier or UPS courier.
The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).
Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.
UK Delivery Charges
Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.
| Order Value | UK Delivery Charge |
|---|
| Up to £39.99 | £4.95 |
| £40.00 and over | FREE |
Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.
What is EN 388?
You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.
There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.
How Do I Read the EN 388 Score?
Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.
Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.
Where Can I Find Out More?
This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.
.jpg)
.jpg)
