Uvex C300 Wet Cut Resistant Grip Gloves

Working in wet and dry conditions tends to have their fair share of difficulties and hurdles, but with a good pair of gloves this can diminish significantly. The Uvex C300 Wet Cut Resistant Grip Gloves are crafted to provide additional grip in wet and dry settings. With its innovative high-performance elastomer coating, the gloves are highly flexible, allowing you to remain dexterous throughout use.

The product code for these gloves is 60542.

Physical Resistance of the Uvex C300 Gloves

The Uvex C300 Grip Gloves have been tested according to EN 388, which is a European standard to gauge the extent to which a glove protects you against physical hazards. Please find the results below:

Key Features and BEnefits

• Offers excellent grip in wet and dry environments
• Provides outstanding breathability as a result of Uvex Climazone technology
• Sets the standards for protection, comfort, tactility and efficiency
• Palms and fingertips are coated with high-performance elastomer (HPE)
• Innovative Soft Grip coating offers outstanding abrasion resistance
• Patented Uvex Bamboo TwinFlex technology provides good cut protection
• Highly thin and flexible for improved dexterity
• Silicone-free construction according to the imprint test

Applications of the Wet Grip Gloves

The Wet Cut Resistant Gloves offer a moderate level of resistance against cuts, as well as excellent protection and grip in wet or dry environments. As a result, the gloves are suitable for a number of different applications. This includes the following:

• Assembly
• Automotive industry
• Car manufacturing
• Glass handling
• Logistics
• Maintenance
• Metalworking
• Metal fabrication
• Metal handling
• Metal pressings
• Sharp object handling
• Sheet metal handling
• Sheet metal processing
• Sheet steel manufacturing
• Sheet steel mills
• Shipping
• Sorting
• Waste sorting

Breathable Construction

Gone are the days where you have to walk around with bulky, hot work gloves! The Uvex C300 Wet Gloves use Uvex Climazone technology for improved breathability. This helps you remain as comfortable as possible throughout use, even when you're working for long periods of time.

Offers Excellent Grip

The Cut Resistant Grip Gloves are designed with an HPE coating on the palms and fingertips to improve your grip. Even when you're working in wet environments, these gloves work to provide you with the grip you need to excel at work.

Learn More About the EN 388 Process

Find out more about the process for testing the physical resistance of a glove by watching the video below.

Sizing Information

The Uvex C300 Grip Gloves are available in five different sizes to provide you with a more tailored fit. To find out which size you require, please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, then measure the length of your hand from the tip of your middle finger to your wrist.

Documentation of the Cut Resistant Grip Gloves

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.