Ejendals Tegera Infinity 8808 Cut-Resistant Work Gloves

Ejendals Tegera Infinity 8808 Cut-Resistant Work Gloves combine contact-heat safety with a great level of cut-resistance to form a pair of gloves ideal for mechanics, HVAC installation, automotive professionals and pipe fitters. Designed to a specification set that doesn't limit dexterity, their high level of protection doesn't stop you handling intricate and delicate material with ease. 

What's Included?

• 1 x Pair of Work Gloves

Sizing Information for Ejendals Tegera Heat-Resistant Safety Gloves

Ejendals 8808 Cut and Heat-Resistant Safety Gloves are available in five different sizes. To find the perfect one for you, simply measure your palm circumference (ignoring the thumb area) and the length of your hand as indicated in the image below.

Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.

Who Can Use the Tegera 8808 Automotive Work Gloves?

Ejendals Tegera Heat-Resistant Work Gloves are lightweight and slender. Their combination cut and heat resistance ratings make them perfect for: 

• HVAC
• Machine Operation
• Assembly/Fitting
• Mechanics
• Building
• Glass Handling
• Metalwork
• Construction
• Automotive
• Engineering

How Do Ejendals Tegera Cut and Heat Resistant Gloves Protect My Hands?

For a full list of exactly what Tegera 8808 Cut-Resistant Safety Gloves do to protect your hands, please see below:

• Contact Heat
• Dirt
• Cuts
• Lacerations
• Contact Burns
• Oil
• Scuffs and Scratches
• Grease

Protection Ratings and Safety Standards

EN 388: Mechanical Resistance

• EN 388: 4X43D

EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.

EN 407: Heat Resistance

• EN 407: X1XXXX

EN 407 is a European safety regulation governing the sale of gloves and garments that are resistant to any number of fire, heat and molten related hazards. Please view the table below to find out more:

Key Features and Benefits

• Contact-heat safe for handling material with a temperature not exceeding 100°C
• Level D cut-resistance is great for jagged metal, glass and serrated edge material
• Maximum Level 4 tear and abrasion resistance under EN 388
• Nitrile palm works tirelessly to improve grip strength in damp and oily conditions
• Reinforced thumb crotch bolsters an inherently weak fabric area
• Excellent gloves for HVAC, mechanics and automotive pros
• Slender design is lightweight and flexible
• OEKO-Tex certificate demonstrates sensitive-skin friendly design
• Available in five different sizes

Great Cut-Resistance Rating

If you're in the market for gloves that let you handle serrated edge material, metal, glass and other medium-to-high risk sharp objects, look no further. A Level D rating is great for shielding the hand against abrasive and sharp objects commonly found in fitting and installation applications.

Think you need even more protection? Take a look below to see some even more cut-resistant gloves:

• All Our Cut-Resistance Gloves

Once you're there, you can use this menu on the left hand side to shop by "Level of Cut Resistance"

See Infinity for Yourself

If you're interested in learning more about the Tegera Infinity collection of gloves, take a look at the video below:

Safely Handle Heated MAterial

Ejendals Tegera Cut-Resistant Gloves allow the user to safely handle material with a temperature not exceeding 100°C for a up to 15 seconds. This means you can handle, carry, transfer and work directly with highly volatile material without worrying about burns, scolding or damage to your hands.

Incredibly CRF Cut-Resistant Foundation

CRF stands for cut-resistant fibres, which are a technology system developed by Ejendals for use in their most cut-resistant gloves and garments. Designed to remain incredibly flexible, it's used in sleek work gloves that are manufactured to preserve dexterity and precise touch without compromising safety.

You'll find CRF technology in action with thinner gloves that have a high level of cut-resistance. Gloves that use CRF technology are typically used in automotive, HVAC and metal workshops, where a high degree of protection and fingertip accuracy is required.

What Are the Benefits of a Nitrile Coating?

Nitrile is an inexpensive coating that lines the palms and 75% of the back hand side of Ejendals Tegera 8808 Cut-Resistant Gloves. Highly absorbent and grippy, nitrile is a great coating because it absorbs microscopic particles of moisture and oil to improve grip strength and stability. 

Why Choose a 3/4 Coating?

A 3/4 coating is a great choice for those who sweat excessively whilst at work. This is because it keeps the back of the glove partially uncovered, allowing sweat, odour and perspiration to exit naturally whilst you work. 

Incredible Tear and Rip Resistance

Boasting the maximum level 4 tear and abrasion resistance ratings under EN 388, Ejendals Tegera Cut and Heat Resistant Gloves show why they're perfect for handling very abrasive material. Built to last in the most volatile environments, their robust and reliable construction holds up brilliantly in the face of cuts, incisions, scuffs and scratches.

Reinforced Thumb Crotch

A reinforced thumb crotch refers to the bolstered area between the thumb and index fingers, which traditionally rips and tears very easily. Tegera 8808 Level D Cut-Resistant Gloves lined this area with a rubber-reinforced piece of fabric to prevent tears, rips and shredding when your grip is at its tightest.

OEKO-Tex Approved

OEKO-Tex is a certificate given to fabrics, garments and items of clothing which demonstrate a low-level of harmful and allergenic chemicals. Great if you have sensitive skin or a condition that flares up easy, finding OEKO-Tex approved items in person is easy. Simply look for the big green sticker!

What Are Ejendals 629 Heat Resisstant Gloves Made From?

• Inner Material: HPPE (High performance polyethylene), Nylon, Glass fibre thread, Elastane
• Coating Material: Nitrile, Foam Nitrile & Water-based Polyurethane
• Lining Material: CRF Technology, Glass fibre thread, Nylon, Spandex, 15gg

Glove Specifications

• Coating Style: 3/4 Double-dipped Nitrile
• Grip Design: Foam Grip
• Cuff Style: Knitwrist

Additional Documents

• Data Sheet
• Declaration of Conformity

Ejendals Sustainability Goals

Here at SafetyGloves.co.uk we take pride in sourcing sustainable and environmentally friendly suppliers. Ejendals are no different, with a company policy that puts being part of a global community at its heart. This policy includes not just a focus on reducing carbon emissions, increasing recycling and minimising waste, but working to reduce the impact of solvents used in gloves based on the current knowledge available.

A Focus on a Better World

Ejendals want to limit their environmental impact in order to make the world better for future generations. Their work includes:

• Imposing environmental requirements on those who deliver products, packaging and services
• Reducing the amount of chemicals used in the manufacturing process
• Ensuring that staff are educated on the impact of the materials used
• Manufacturing high quality products to ensure less waste
• Ship as much as possible to reduce aeroplane emissions
• Minimising waste and recycling materials

Ejendals are also certified in accordance with environmental management system ISO 14001. For a full breakdown of their sustainability goals, see the link below:

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.