Nitra-NL15 Nitrile Chemical Resistant Gloves
With a lightweight but hardwearing construction, the Nitra-NL15 Nitrile Chemical Resistant Gloves provide good protection against a wide range of solvents and chemicals in order to prevent accidental exposure and injuries. Ensuring extra safety, a sandy, roughened finish to the palm and fingertips of these gloves provide improved grip in both wet and dry applications, allowing you to retain your grasp whilst chemical handling.
What's Included?
Sizing Information
The Nitra-NL15 Nitrile Chemical Gloves are available in four different sizes and all have a 33cm length. To find the best size for your hands, simply measure the circumference of your palm your hand as shown in the diagram below. Once you have these measurements, please match your results to the sizing table and select your desired size from the drop-down at the top of the page.
| Size | Palm Circumference | Hand Length |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
Applications for the Nitra NL15 Chemical GLoves
The Nitra NL15 Chemical Gauntlets protect hands against chemicals and mechanical risks, and are soft and flexible for good user dexterity. Some suitable applications for these gloves include, but are not limited to, the following:
- Agriculture
- Automotive
- Food Processing
- Janitorial
- Manufacturing
- Paint Spraying
- Retail
- Healthcare
- Laboratory
- Pharmaceutical
Tested to EN Safety Standards For Reliable Protection
EN 388: Mechanical Resistance
The Nitra NL15 Chemical-Resistant Gloves have been tested against mechanical risks under the European standards EN 388 and EN 374. EN 388 tests the gloves' protection against hazards such as cuts, tears, puncture, and abrasion, while EN 374 tests the protection the gloves provide against the penetration and permeation of chemicals.
| Hazard | Resistance Level |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 0 |
| Puncture Resistance | Level 1 |
| ISO Cut Resistance | N/A |
EN 374: Chemical Resistance
- EN ISO 374-1:2016 (A, J, K, L, O, T)
| Chemical |
| Methanol (A) |
| N-Heptane (J) |
| Sodium Hydroxide 40% (K) |
| Sulphuric Acid 96% (L) |
| Ammonia Water 25% (O) |
| Formaldehyde (37%) (T) |
Key Features and Benefits
- Nitrile chemical gloves protect hands when working with a range of chemicals
- Sandy, roughened finish on palm and fingertips improve grip
- Suitable for both wet and dry applications
- Soft and flexible with good dexterity
- Cotton flocked lined for improved comfort
- Safe for use with food
- Anti-static properties to prevent accidental discharge
- Long 13" (33cm) length for extra coverage to the forearms
Soft and Flexible
Chemical protection gloves are a must for protecting the skin against work-related exposure to chemicals and solvents, but if they aren't dexterous they could be deemed unsafe to use. The Nitra NL15 Gloves are soft and flexible for good dexterity, allowing you to handle chemicals safely.
Abrasion Resistant
Despite its soft and flexible construction the strength of these chemical gloves should not be underestimated. A level 4 abrasion resistance score has been given to these gloves meaning they provide maximum levels of protection against wearing down, scrapes, and scuffs.
Documentation
.jpg)
