Ansell HyFlex 70-415 35.6cm Cut-Resistant Kevlar Sleeve With Bar Tack
The Ansell HyFlex 70-415 35.6cm Cut-Resistant Kevlar Sleeve With Bar Tack is a knitted protective sleeve manufactured from exceptionally-strong Kevlar fibres for superior protection against cut and contact heat. Featuring a bar tack to hold the sleeve firmly in place throughout use, the HyFlex 70-415 Sleeve is ideal for a wide range of medium-risk applications where direct heat and cut are safety concerns.
Features and Benefits of the HyFlex 35.6cm Kevlar Sleeve
- Knitted sleeve with a length of 35.6cm
- Made from Kevlar for strong and reliable protection
- Double-layered for enhanced protection
- Unique “Stay-Up” band ensures sleeve remains in place
- Bar tack ensures a secure fit at the thumb
- Protects against contact heat up to 100°C
- Excellent resistance to cut and tear
- Washable at 40°C for good hygiene
- Lightweight and flexible for maximum comfort
Manufactured from Kevlar for Lightweight Protection
The HyFlex 70-415 Sleeve is manufactured from 100% DuPont Kevlar to offer a high cut-resistance-to-weight ratio. As a result, this sleeve provides excellent protection against cut, while remaining lightweight for maximum user comfort and dexterity.
Bar Tack For A Secure Fit
A bar tack holds the HyFlex 70-415 Sleeve securely in place, preventing it from rolling up the arm. This ensures that the sleeve provides maximum protection at all times.
Applications for the Hyflex 70-415 Cut-Resistant Sleeve
Protecting against cut and contact heat, the HyFlex Kevlar Sleeve is suitable for a variety of applications, primarily in the automotive, construction, glass and metal fabrication industries. Ideal uses include (but are not limited to):
- Body assembly
- Glass repair
- Metalwork
Testing of the HyFlex 70-415 Kevlar Sleeve
The Ansell 70-415 Sleeve meets the following specifications:
- European Directive 89/686/EEC
- EN 420:2003 + A1:2009
- EN 388:2016: 133XC
- EN 407:2004: X1XXXX
The HyFlex Sleeve With Bar Tack has been tested to EN 388:2016 to determine its resistance to mechanical risks. Please see the table below for the results of these tests:
Hazard | Resistance Rating |
Abrasion | Level 1 |
Cut | Level 3 |
Tear | Level 3 |
Puncture | X |
ISO Cut | C |
When tested to EN 407:2004 for heat resistance, the HyFlex Kevlar Sleeve achieved the following results:
Hazard | Resistance Rating |
Flammability | X |
Contact heat | Level 1 |
Convective heat | X |
Radiant heat | X |
Small splashes of molten metal | X |
Large splashes of molten metal | X |
Sizing of the Ansell 70-415 Sleeve
This sleeve is available in one size, which should fit most users. The sleeve has a length of 35.6cm.
Documentation for the Ansell 70-415 35.6cm Cut-Resistant Sleeve
Conformity Statement | Instructions for Use |
| |
Please note that the price listed is for one HyFlex 70-415 Sleeve only.