Ejendals Tegera 134 Welding Gloves
The Ejendals Tegera 134 Welding Gloves are medium leather work gloves with heat-resistant properties. Made with supple full grain goatskin, the Ejendals Tegera 134 have good levels of fingertip sensitivity for fine handling tasks. Featuring the ability to withstand contact heat up to 100°C as well as providing protection against welding sparks and grinding splash, the Tegera 134 are suitable for welding and other hot work applications. In addition the Tegera 134 feature a water and oil-repellent exterior.
The Ejendals Tegera 134 Gloves are supplied in a brown/black design with an extended safety cuff for additional protection. They feature an elasticated 180° fastening at the wrist for a comfortable fit.
The product code for these gloves is 134.
Applications of the Ejendals Tegera 134 Welding Gloves
The Ejendals Tegera 134 are designed for year round use in oily/greasy and/or outdoor environments and are suitable for the following applications:
- Automotive
- Hot Work
- Metal Fabrication
- Metalwork
- MRO (Maintenance, Repair and Operations)
- Sheet Metal Work
- Welding
Testing of the Ejendals Tegera 134 Welding Gloves
Hazard | Resistance Rating |
Abrasion | 3 |
Cut | 4 |
Tear | 2 |
Puncture | 2 |
- EN 407:2004 Protective gloves against thermal risks (heat and/or fire):
Hazard | Resistance Rating |
Burning | 4 |
Contact Heat | 1 |
Convective Heat | 2 |
Radiant Heat | 3 |
Molten Metal (Splashes) | 4 |
Molten Metal (Large Quantities) | X |
- EN 12477:2001 + A1:2005 Protective gloves for welders
- Type A - Lower dexterity (with higher other performance)
- EN 1149-2:1997 Electrostatic properties (vertical resistance)
Sizing of the Ejendals Tegera 134 Welding Gloves
The Ejendals Tegera 134 are offered in five different sizes, the dimensions of which can be found below. To measure your hand, measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together.
Please note that if you are between two sizes, we would recommend buying the size above.
Size | Circumference of Hand (mm) | Length (mm) | Minimum Length of Gloves (mm) |
Size 7 | 178mm | 171mm | 230mm |
Size 8 | 203mm | 182mm | 240mm |
Size 9 | 229mm | 192mm | 250mm |
Size 10 | 254mm | 204mm | 260mm |
Size 11 | 279mm | 215mm | 270mm |
Documentation for the Ejendals Tegera 134 Welding Gloves
Conformity Statement | Instructions for Use |
 |  |