Ejendals Tegera 8832R Latex-Coated Cut and Heat-Resistant Gloves
In the market for a genuine all-round pair of safety gloves? Ejendals Tegera 8832R Latex-Coated Cut and Heat-Resistant Gloves provide an unrivalled range of protection covering contact heat, convective and contact cold and the complete list of mechanical hazard protections awarded under EN 388. They use a 3/4 coating to protect more of the hand and are available in four different sizes.
What's Included?
- 1 x Pair of Safety Gloves
HOW DO TEGERA 8832R GLOVES PROTECT YOUR HANDS?
Like any true all-rounder, Ejendals 8832R Gloves highlight a range of threats and protect against them all. Using a 3/4 coating to bolster their mechanical hazard protection, they also allow the user to handle material heated to 250°C. They have a Level D cut-resistance rating thanks to a HPPE/Steel fibre core and are winter lined for use in the coldest of temperatures.
KEY PROPERTIES AND FUNCTIONS
- Winter lining ensures your hands stay warm no matter how cold it gets
- 250°C contact heat resistance allows for the safe handling of heated material for up to fifteen seconds
- Cut resistance Level D prevents incisions and cuts from blades, knives and sheet metal
- Medium-weight 13-gauge design marries protection with flexibility
- 3/4 coating bolsters protection at the back of the hand as well as the palm and fingers
- Sandy latex coating work to enhance grip stability and strength
- Knitted wrist cuff stops dirt, dust and debris entering to irritate the hand
- Available in four different sizes for a better level of fit
Which Size Is Right for Me?
To find your perfect size, simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
Size | Circumference of Palm (mm) | Length of Palm (mm) |
Size 7 | 178mm | 171mm |
Size 8 | 203mm | 182mm |
Size 9 | 229mm | 192mm |
Size 10 | 254mm | 204mm |
Protection Ratings
EN 388
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.
Standard | Resistance Rating |
Abrasion Resistance | Level 2 |
Cut Resistance | N/A |
Tear Resistance | Level 4 |
Puncture Resistance | Level 2 |
ISO Cut Resistance | Level D |
EN 511
EN 511 is the European regulation governing cold-resistant garments and gloves. This regulation uses a number of intricate and complex tests to assess the contact cold, convective cold and water permeability of a fabric. Please view the table below to see how these gloves performed:
Standard | Resistance Rating |
Convective Cold Resistance | Level 1 |
Contact Cold Resistance | Level 2 |
Water Permeability | N/A |
EN 407
EN 407 is a European safety regulation governing the sale of gloves and garments that are resistant to any number of fire, heat and molten related hazards. Please view the table below to find out more:
Standard | Resistance Rating |
Burning Resistance | N/A |
Contact Heat Resistance | Level 2 (250°C) |
Convective Heat Resistance | N/A |
Radiant Heat Resistance | N/A |
Resistance to Small Molten Splashes | N/A |
Resistance to Large Molten Splashes | N/A |
Suitable Environments for Use
What Is a 3/4 Coating??
A three-quarter coating refers to a finish that covers the palm, back of the hand and the fingers, leaving the final quarter of the glove uncovered. They are desirable because they enhance a gloves protection against cuts, abrasions, incisions and scratches by covering a much large surface area than say a palm or knuckle-only coating does.
WHAT COATING DO EJENDALS LATEX COATED GLOVES USE?
A sand finished latex coating covers the palm, fingers and back of the hand, giving Ejendals 8832R Gloves a slightly rough, highly protective finish that aids with grip and protection.
Amazing Contact Heat Resistance
Handling heated material of any kind is incredibly dangerous. Tegera 8832R Gloves use a treated fabric to allow the safe handling of material with a temperature of up to 250°C for an amazing fifteen seconds. This is ideal for mechanics, blacksmiths, foundry workers or any professional handling highly dangerous, heated material.
WHAT ARE 8832R GLOVES MADE FROM?
Ejendals 8832R Gloves are manufactured using a blend of high-performance polyethylene, stainless steel fibre yarn, polyester and nylon. This blend creates a skin-friendly fabric that is cut-resistant, hard-wearing and above all else provides a snug, comfortable wearing experience for the user.
Incredible Cut Resistance
Tegera Winter-Ready Gloves have been awarded a Level D cut-resistance rating under EN 388. This means the fabric is capable of withstanding a huge 22 newtons of downward pressure applied by a sharp implement.
What Does This Mean?
In real terms, this is the difference between a blade cutting through a gloves fabric and the tip becoming jammed between the steel fibres upon contact.
Cold Weather Ready
Ejendals Tegera Cold Weather Gloves are lined with a 13 gauge acrylic material that prevents cold air and moisture entering the palm and lowering the hands temperature. They are suitable for use outdoors and have Level 2 contact cold and Level 1 convective cold ratings under EN 388. This means cold will not be transferred from the object or from the air surrounding the user.
Declaration of Conformity Statement
Click here to view the declaration of conformity statement for this product