Ejendals Tegera 886 3/4 Dipped Fine Assembly Gloves
For assembly line work, your fingers need both freedom of movement and protection. The Ejendals Tegera 886 3/4 Dipped Fine Assembly Gloves are light nylon gloves which are 3/4 dipped in nitrile, providing water and oil-repellent properties in the palm and knuckle. With excellent fingertip sensitivity and good levels of grip, the Ejendals Tegera 886 are suitable for a variety of light work applications.
The Ejendals Tegera 886 Gloves are supplied in a black/yellow design with a knitwrist cuff for improved comfort.
The product code for these gloves is 886.
Applications of the Ejendals Tegera 886 3/4 Dipped Fine Assembly Gloves
The Ejendals Tegera 886 are designed for use in oily/greasy as well as dirty environments and are suitable for the following applications:
- Building and Construction
- Fine Assembly
- Installation (including Electrical and HVAC)
- Soil Preparation
- Transport Work
- Warehouse Work
Testing of the Ejendals Tegera 886 3/4 Dipped Fine Assembly Gloves
The table below showcases the test results of the Ejendals Tegera 886 Gloves according to EN388 Mechanical Risk specifications.
|Hazard ||Resistance Rating |
|Abrasion ||4 |
|Cut ||1 |
|Tear ||2 |
|Puncture ||0 |
Sizing of the Ejendals Tegera 886 3/4 Dipped Fine Assembly Gloves
The Ejendals Tegera 886 are offered in six different sizes, the dimensions of which can be found below. To measure your hand, measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together.
Circumference of Hand (mm)
Minimum Length of Gloves (mm)
|Size 6 ||152mm ||160mm ||220mm |
|Size 7 ||178mm ||171mm ||230mm |
|Size 8 ||203mm ||182mm ||240mm |
|Size 9 ||229mm ||192mm ||250mm |
|Size 10 ||254mm ||204mm ||260mm |
|Size 11 ||279mm ||215mm ||270mm |
Documentation for the Ejendals tegera 886 Fine Assembly Gloves
|Conformity Statement ||Instructions for Use |
| || |