HexArmor 9000 Series 9013 Cut-Resistant Nitrile Palm-Coated Handling Gloves

In order to prevent slipping while working in wet conditions, HexArmor 9000 Series 9013 Cut-Resistant Nitrile Palm-Coated Handling Gloves offer outstanding grip and total sensitivity helping to increase your safety at work. Furthermore an innovative mix of HPPE and SuperFabric provides exceptional cut-resistance, while impressive abrasion and tear resistance can protect you in high risk working conditions.

What's Included?

• 1 x Pair of Level F Gloves

Sizing Information for HexArmor 9000 Series Nitrile Palm-Coated Gloves

To find your perfect size, simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.

KEY FEATURES OF THE 9000 SERIES CUT-RESISTANT NITRILE PALM-COATED GLOVES

• SuperFabric inner liner offers outstanding Level F cut resistance
• Designed to provide excellent dexterity ideal for handling
• Suitable for use in dry and wet conditions
• Sandy nitrile palm enhances grip strength and stability in wet conditions
• Across the board mechanical hazard protection under EN 388
• HPPE liner ensures protection from abrasion and tears
• Features an elastic cuff for a comfortable fit
• Available in four different sizes for a guaranteed perfect fit

Protection and Resistance Ratings

EN 388

• EN 388: 4X43F

EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.

The EN 388 cut resistance test uses a single sharp implement to repeatedly pressure a glove in order to determine the amount of force required to cause visible and functional damage.

Maximum Level F Cut Resistance

What does this rating mean? Level F cut resistance dictates a garment, glove or fabric can withstand in excess of a jaw-dropping 30 newtons of downward pressure. This means a sharp implement must generate an exceptional amount of force to damage and break through to reach your skin and hand.

Why Is This Useful?

If you're a machinist or you work with heavy-duty equipment and products, you need to protect your hands. If you're not wearing adequate gloves, a sharp edge, object or piece of material could slice through your glove and your hand, causing life-threatening injury.

Applications of the HexArmor 9000 Series Palm-Coated Gloves 9013

HexArmor Handling Gloves are well suited to handling based applications in dry and wet conditions. These applications can be high risk, because a HPPE liner along with a SuperFabric inner core ensures total protection from threats:

• Assembly
• Blade Handling
• Builders
• Demolition
• Construction
• Debris Handling
• Glass Handling
• Joinery
• Knife Handling Applications
• Machine Operation
• Maintenance
• Roofing
• Scaffolding
• Sharp Object Handling
• Sheet Metal Handling
• Woodworking

Combines SuperFabric with HPPE Blend

The HexArmor Series 9000 Gloves 9013 stand out because they combine the innovative and strong SuperFabric with a tough HPPE and glass fibre blend shell that offers outstanding cut resistance. This is met with an impressive level of dexterity, meaning that safe and secure general handling can be achieved despite working in high risk working conditions.

This innovative blend of SuperFabric and HPPE provides the unique qualities of grip, control and safety. Furthermore, their suitability for use in wet environments maximises their potential, meaning that they are well suited to a wide range of applications that includes assembly, engineering and maintenance.

Superb Grip in Wet Handling Tasks

Handling in wet conditions is dangerous, which is why it's important to reduce injury risk by using gloves that are well suited to that environment. The HexArmor Gloves 9000 have outstanding grip, high sensitivity and impressive dexterity, meaning that the user has total control when handling in slippery conditions.

Material Makeup of Helix 9000 Series Gloves

• Glove Liner: Polyethylene, 50% Polyethylene, 20% Polyester, 13% Glass Fibre, 7% Spandex
• Palm Liner:​ 63% plastic, 37% polyester
• Palm Coating: 100% Nitrile

Additional Documentation

• Data Sheet
• Declaration of Conformity Statement

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.