HexArmor Rig Lizard Fluid 7102 Impact Resistant Cut Level C Gloves

Facilities that utilise or rely on water to function require gloves that will not only resist liquids, but provide serious protection against mechanical risks. Combining impact, cut and liquid resistance into one package, the HexArmor Rig Lizard Fluid 7102 Impact Resistant Cut Level C Gloves provide all the control and dexterity a high-risk industrial workers needs to succeed and stay safe.

Product Codes

• HexArmor Rig Lizard Fluid 7102 Impact Resistant Cut Level C Gloves - Size 7 (Small): 7102-S
• HexArmor Rig Lizard Fluid 7102 Impact Resistant Cut Level C Gloves - Size 8 (Medium): 7102-M
• HexArmor Rig Lizard Fluid 7102 Impact Resistant Cut Level C Gloves - Size 9 (Large): 7102-L
• HexArmor Rig Lizard Fluid 7102 Impact Resistant Cut Level C Gloves - Size 10 (Extra Large): 7102-XL

Which Size Should I Choose?

To find the right size for you, please measure the circumference of your hand (excluding the thumb) around your knuckles with your fingers closed, as shown in the diagram below. Then, match your measurement to the corresponding size in the sizing guide below the diagram, and select using the drop-down menus near the top of the page.

Why Should I Buy the HexArmor Rig Lizard Fluid 7102 Gloves?

• Strong Construction: High performance 13-gauge polyethylene and glass fibres provide impressive Level C cut protection
• IR-X Impact Exoskeleton: Highly flexible impact resistant armour allows for ANSI/ISEA 138 Level 1 impact protection
• Powerful Grip: Sanded nitrile palms provide users with superior grip and abrasion resistance
• Full Double Nitrile Dip: Wearers can enjoy excellent water/fluid resistance thanks to this coating
• High Visibility: Hi-Vis colour across the backs of the hands enhance visibility
• Comfortable Fit: Elasticated cuffs allow users to exercise full control with a snug fit

Where Can I Use the HexArmor Rig Lizard Fluid Cut Level C Gloves?

Thanks to their impact resistance and excellent liquid resistance, the HexArmor Rig Lizard Fluid Gloves are useful in a variety of industries with water-based operations. Suitable tasks include:

• Oil and Gas
• Water Filtration
• Reservoir Work
• Water Tanks
• Construction
• Agriculture
• Refineries
• Sheet Metal Handling
• Metal Fabrication
• Offshore Work
• Plumbing

What Can the HexArmor Rig Lizard Fluid Gloves Protect Me From?

To ensure these gloves provide you with the protection you need, they have been tested to a range of different standards. The results of mechanical resistance tests under EN 388 can be found in the tables below. More information on the standards to which these gloves have been certified can be found in the PDF documents near the bottom of this page.

EN 388

• EN 388: 4X42CP

Why Choose These Gloves For High Risk Handling Work?

• They have excellent resistance to fluids, including water and oil
• They have exceptional resistance to lacerations
• They resist impacts and bumps with ease
• They are light and dexterous
• They provide an extraordinary grip

How Grippy Are the Rig Lizard Impact Gloves?

If you want a powerful grip, you can't do better than the Rig Lizard Impact Gloves. Double dipped in quality nitrile butadiene rubber (NBR), these HexArmor Gloves will resist liquids and oils of all types, while their sanded palms will improve the handling of tools and materials.

Documentation for the HexArmor Rig Lizard Impact Gloves

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.