Ansell AlphaTec AquaDri 58-335 Gauntlet Gloves

The Ansell AlphaTec AquaDri 58-335 Gauntlet Gloves are constructed from high-performance nitrile to provide excellent abrasion and chemical resistance. They feature an inner liner with AquaDri moisture-management technology that provides 10 times more moisture absorption than traditional cotton-flocked linings, and a reversed-lozenge finish for improved grip in both wet and dry conditions.

Features and Benefits of the AlphaTec 58-335 Gloves

• Gauntlet gloves made from high-performance nitrile
• Formulated for maximum dexterity and flexibility
• Reversed-lozenge finish for good grip
• Enhanced grip in both wet and dry conditions
• AquaDri technology liner for superior moisture absorption
• Foldable cuff gutter prevents dripping on the forearm
• Advanced protection against bases, oils, fuels, solvents, greases and fat
• Anti-static according to EN 1149-5:2008

High-Performance Nitrile

The Ansell 58-335 Gloves have been produced using a high-performance nitrile compound that offers superior snag, puncture and abrasion protection to neoprene and rubber. They have been formulated to provide good dexterity and flexibility for better performance and reduced hand and arm fatigue.

Advanced Protection

The AlphaTec AquaDri Gloves feature two-layer construction to keep hands drier for longer, and have a foldable cuff gutter that prevents liquids from dripping on the forearm for enhanced protection. They also feature a superior nitrile film that gives advanced chemical protection against incidental exposure to bases, oils, fuels, some solvents, greases and animal fats.

Learn More about Ansell AquaDri Technology

Watch the video below to find out more about Ansell's AquaDri technology.

Applications for the Ansell AlphaTec AquaDri 58-335 Gauntlets

These gloves are suitable for use in the automotive, chemical, metal fabrication, pharmaceutical and machinery and equipment industries. Ideal applications include (but are not limited to):

• Chemical mixing/handling/transferring/pouring
• Opening and draining pumps/valves
• Painting/sealing
• Packaging
• Changing oil 
• Fixing pumps
• Cleaning
• Sampling/testing

Testing of the AlphaTec AquaDri 58-335 Gloves

The Ansell AlphaTec 58-335 Gauntlet Gloves meet the following specifications:

• European Directive 89/686/EEC
• EN 420:2003 + A1:2009
• EN 1149-5:2008
• EN 388:2016: 4101A
• EN 374-1:2016: JKLOPT (Type A)
• EN 374-5:2016 (protection against micro-organisms)
• European Regulation 1935/2004 'Materials and Articles to Come into Contact with Foodstuff'
• European Regulation 2023/2006 'Good Manufacturing Practices for Materials and Articles to Come into Contact with Foodstuffs'

To view the Food Declaration of Product Compliance for these gloves, please click the PDF icon below:

The table below shows the test results of the Ansell AlphaTec 58-335 Gloves according to EN 388:2016 Mechanical Risk specifications.

When tested to EN 374-1:2016, the 58-335 Gloves achieved a permeation resistance rating of at least 30 minutes when exposed to the following chemicals:

Sizing of the Ansell AlphaTec AquaDri Gloves

These gloves are available in a range of sizes, making them suitable for most users. Please consult the table below for details, then select the required size from the drop-down menu at the top of the page. The gloves have a length of 380mm and a thickness of 0.45mm (nitrile) + 0.35mm (AquaDri 2).

Documentation for the AlphaTec 58-335 Gloves

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.