Delta Plus VE780 PVC Coated Chemical Resistant Gloves

Gloves used for heavy industry work need to be resistant to both chemical and mechanical hazards, ensuring your hands remain protected no matter what the task at hand involves. PVC coated, the Delta Plus VE780 PVC Coated Chemical Resistant Gloves provide maximum abrasion resistance while being very resistant to oils, chemicals, and petroleum derivatives. Providing further protection, the textured structure of these gloves ensure a good grip when handling, for no accidents or spilling of chemicals.

What's Included?

• 1 x Pair of Gloves

Sizing of the VE780 PVC Coated Chemical Gloves

The VE780 PVC Coated Chemical Gloves are available in a choice of sizes, which makes them suitable for most users. To find the best size for your hands, simply measure the circumference of your palm and the length of your hand as shown in the diagram below. Once you have these measurements, please match your results to the sizing table and select your desired size from the drop-down at the top of the page.

Applications of the VE780 PVC Coated Gloves

Resistant to both mechanical hazards and chemicals, the VE780 PVC Coated Cotton Lined Gloves are suitable for a range of applications that involve dealing with dangerous substances, oils, and petrol derivatives. Some common applications for these gloves include:

• Laboratory
• Chem-Petrochem
• Oil and gas
• Mining
• Waste management

Tested to EN Standards for Reliable Protection

The Delta Plus VV835 Gloves have been tested against mechanical risks under the European standards EN 388 and EN 374. EN 388 tests the gloves' protection against hazards such as cuts, tears, puncture, and abrasion, while EN 374 tests the protection the gloves provide against the penetration and permeation of chemicals.

EN 388: Mechanical Resistance

• EN 388: 4131X

EN 374 : Chemical Resistance

Key Features and Benefits

• PVC coated for protection and cotton lined for comfort
• Extra-long cuff that protects the wrists
• Rough-textured palms for excellent grip
• Excellent resistance to abrasions
• Repel oils, chemical products and petrol derivatives
• Free from silicone and latex for reduced skin irritation
• Can easily be hand washed to keep them hygienic
• Overall length of 30cm
• Thickness: 1.3mm

Materials

• Support: Cotton (100%)
• Coating: PVC (100%)

Documentation

• Conformity Statement
• Data Sheet
• User Instructions

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.