HexArmor PointGuard Ultra 9032 Cut Level F Needle Handling Gloves
Law enforcement and waste management industries necessitate the use of hands as tools. Unfortunately, guarding against debris like needles and glass are vital in these lines of work. Layered with SuperFabric and with one of the highest needlestick and cut resistant fabrics available, HexArmor PointGuard Ultra 9032 Cut Level F Needle Handling Gloves are designed to protect the wearer from needlestick and serious cut injury.
What's Included?
- 1 x Pair of Safety Gloves
Key Information and Attributes
- Highest needlestick rating available on the market
- Level F cut resistance rating is maximum available under EN 388
- SuperFabric construction fabric protects the entire palm against injury
- 15 gauge design gives a "second-skin" style feel
- Protection from injection apertures ranging from .002" to .012" (0.05 to 0.3 mm) using standard hydraulic needles
- Protects against fluid-injection injuries up to 10.150 PSI (700 bar)
- Three-quarter sandy nitrile coating enhances grip strength and stability
- Elasticated knit wrist cuff prevents dirt and debris entering the glove
- Seamless construction allows enhanced comfort and breathability while maintaining dexterity and tactility
- Available in four different sizes
Sizing of the Hexarmor PointGuard Gloves
The HexArmor PointGuard Gloves are available in a number of sizes suitable for a variety of users. Please measure the circumference of your hand around the knuckles (excluding the thumb) with your hand open and your fingers together, and the length of your hand from the tip of your middle finger to your wrist.
| Size | Circumference (mm) | Length (mm) |
| Size 7 (Small) | 178mm | 171mm |
| Size 8 (Medium) | 203mm | 182mm |
| Size 9 (Large) | 229mm | 192mm |
| Size 10 (Extra Large) | 254mm | 204mm |
Resistance Ratings and Protection Standards for 9032 Gloves
EN 388
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.
The EN 388 cut resistance test uses a single sharp implement to repeatedly pressure a glove in order to determine the amount of force required to cause visible and functional damage.
| Standard | Resistance Rating |
| Abrasion Resistance | Level 4 |
| Cut Resistance | N/A |
| Tear Resistance | Level 4 |
| Puncture Resistance | Level 3 |
| ISO Cut Resistance | Level F |
NeedleStick Protection
Aside from their impressive mechanical resistance ratings under EN 388, HexArmor 9032 PointGuard Ultra Gloves have been independently tested for contact protection against needles. Please view the ratings below to see which ratings they conform to:
- ANSI/ISEA Cut: Level A9
- Needlestick: Level 5
So, HOW WELL DO THE POINTGUARD ULTRA 9032 GLOVES PERFORM AGAINST NEEDLES?
The PointGuard Ultra 9032 Gloves provide users with protection from needles apertures ranging from .002" to .012" (0.05 to 0.3 mm) using standard hydraulic needles. Moreover, their robust construction repels against fluid-injection injuries up to 10.150 PSI (700 bar).
Uses of the HexArmor PointGuard Ultra 9032 Gloves
HexArmor Gloves are built to withstand the unpredictable conditions of the field as well as the specialised danger of fluid-based injection. Some applications where the gloves are recommended include:
Why Choose HexArmor Ultra 9032 Gloves For Working with Violent Individuals?
Working with members of the public or prisoners can be difficult, but in some scenarios it can be highly dangerous, especially if their inventory has not been accounted for. By wearing the HexArmor Ultra 9032 Gloves, users can fortify their hands against needlestick and laceration injuries, eliminating a potential hazard from their roster.
Level F Cut Resistance
Level F cut resistance is the highest available on the market. You cannot find better. Level F is the difference between a blade slicing straight through your glove, causing serious damage to your hand, and the tip becoming lodged and jammed between the highly resistance, tightly woven fibres that make up a cut-resistant glove.
SuperFabric Protection System
Serious about heavy-duty protection, SuperFabric was developed in 1996 as a solution for preventing needle and knife incisions. It is the layer that prevents a serrated edge, needle or blade end from breaking through your glove and causing serious injury to your hand.
Sandy Nitrile Coating Benefits
Sandy nitrile refers to a nitrile coating that has been treated with a tiny amount of sand to improve and enhance grip strength and stability. The sandy coating allows the hand to better grip material, reducing the chance for slips and drops.
Additional Documentation
