Polyco Bodyguards 4 Latex Powdered GL818 Disposable Gloves
The Polyco Bodyguards 4 Latex Powdered GL888 Disposable Gloves are made from natural latex which is both strong and thin, making the Polyco Bodyguards 4 Latex Powdered Disposable Gloves extremely dexterous and provides the wearer with comfort and sensitivity. The Polyco Bodyguards 4 Latex Powdered Disposable Gloves feature a textured finish for improved grip and a rolled cuff for additional strength and prevents liquid roll back.
These gloves are incredibly versatile and are typically used in hairdressing salons, laboratories, janitorial industries and more as they provide protection against dirt contamination.
AQL Protection from holes rating 4.0
Applications of use of the BODYGUARDS 4 LATEX POWDERed GL818 DISPOSABLE GLOVES
The Polyco Bodyguards 4 Latex Powder Free GL818 Disposable Gloves are incredibly versatile, they can be used in wet, dry, dirty and clean working environments either indoor or outdoor, depending on industry. Below is a list of some of the typical uses of the gloves.
- Construction
- Waste Management
- Automotive
- Food Manufacturing and Preparation
- Assembly
- Utility
- Local Authority
- Engineering and Manufacture
- Glass Manufacture and Glazing
- Laboratory and Pharmaceutical
- Janitorial
- Hair and Beauty
Additional Information about the Polyco BODYGUARDS 4 LATEX POWDERed GL818 DISPOSABLE GLOVES
- Freedom from holes rating: AQL 4.0
- Rolled cuff for extra strength and prevention of liquid roll back
- Powdered for east donning and sweat control
- Snug fit to aid dexterity
- Excellent grip in both wet and dry conditions
- High level of grip and dexterity
- Protection from dirt contamination
Sizing Information Of The POLYCO BODYGUARDS 4 LATEX POWDERed GL818 DISPOSABLE GLOVES
 | In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes. |
Glove Size | S | M | L | XL |
Measurement across palm | 6.5cm | 7.5cm | 8.5cm | 9.5cm |
Product Code | GL8181 | GL8182 | GL8183 | GL8185 |
Further Information on The BODYGUARDS 4 LATEX POWDERed GL818 DISPOSABLE GLOVES
The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.
To get the best service from your gloves ensure that after use all contaminant is removed.
Store in dry conditions away from direct sunlight and heat.
You are advised to retain packaging for reference.
These safety gloves should not be worn where there is a risk of entanglement with moving machinery.
Conformity Statement and User Instructions
Please find the conformity statement and user instructions for these gloves by clicking the PDF link below.