Polyco Chemprotec Unlined Heavyweight Chemical Resistant Gloves
The Polyco Chemprotec Unlined Heavyweight Chemical Resistant Gloves are unlined rubber safety gloves which are available in variable lengths depending on the level of protection needed. These safety gloves are also available in a middleweight version.
The Polyco Chemprotec Unlined Heavyweight Chemical Resistant Gloves performs well to protect against a variety of chemicals and cleaning agents including acids, alkalis and alcohols. These chemical resistant gloves also attain good EN 388 scores for abrasion and tear resistance enhancing their mechanical protection and durability.
The Polyco Chemprotec Glove comes unlined for easy donning and doffing, allowing for an underglove to be worn for added protection or comfort if required. The anatomical shape and flexibility reduces hand fatigue and a smooth outer surface prevents stickiness and surface tack.
Features of The Polyco Chemprotec Unlined Heavyweight Chemical Resistant Gloves
Provides protection against a wide range of chemicals and cleaning agents.
Underlined for easy donning and allows an underglove to be worn for a
Excellent resistance to abrasion and tears. Also available in a heavyweight version for additional protection.
Available in variable lengths to suit the task in hand.
Testing Of The Polyco Chemprotec Unlined Heavyweight Chemical Resistant Gloves
Resistance to Chemical and Micro-Organisms EN 374
|Chemical ||Breakthrough time in mins |
|Acetone ||> 10 mins |
|Acetonitrile ||> 10 mins |
|Ethyl Acetate ||> 10 mins |
|Nitric Acid 50% ||> 480 mins |
|Sodium Hydroxide 40% ||> 480 mins |
|Sodium Hypochlorite ||> 480 mins |
|Sulphuric Acid 50% ||> 480 mins |
|Sulphuric Acid 96% ||> 240 mins |
Mechanical Hazards EN 388:2003
|Mechanical Hazard ||Performance Level |
|Abrasion ||3 |
|Blade Cut ||1 |
|Tear ||3 |
|Puncture ||1 |
Applications for the Polyco Chemprotec Unlined Heavyweight Chemical Resistant Gloves
- Waste Management
- Local Authority
- Emergency Services
- Engineering & Manufacture
- Oil & Gas
- Chemical Manufacture & Use
- Laboratory & Pharmaceutical
Sizing Information On The Polyco Chemprotec Unlined Heavyweight Chemical Resistant Gloves
| || |
In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand.
We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres.
Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.
|Glove Size ||8 - Small ||9 - Medium ||10 - Large ||11 - Extra Large |
|Measurement across palm ||8cm ||9cm ||10cm ||11cm |
The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.
|8 Small (60cm) ||SC108/08 |
|9 Medium (44cm) ||SC105/09 |
|9 Medium (60cm) ||SC108/00 |
|10 Large (44cm) ||SC105/10 |
|10 Large (60cm) ||SC108/10 |
|10 Large (66cm) ||SC109/10 |
|11 Extra Large (60cm) ||SC108/11 |
To view the chemical resistance guide for these gloves, please see the PDF link below.
Conformity Statement and User Instructions
Please find the conformity statement and user instructions for these gloves by clicking the PDF link below.