ATG 44-505 MaxiCut OIL Reinforced 3/4 Coated Cargo Industry Gloves
Fed up of material, equipment and tools slipping out your hand? Chances are, microscopic particles are lingering on the glove face. ATG 44-505 MaxiCut OIL Reinforced 3/4 Coated Cargo Industry Gloves use a premium-quality nitrile coating to absorb harmful substances, liquids and particles and prevent this from happening. Thanks to their 3/4 coating, they remain breathable, allowing odour, dust and perspiration to exit the glove freely throughout the day.
What's Included?
- 1 x Pair of Cargo Handling Gloves
KEY FEATURES AND ATTRIBUTES
- Grease and oil resistant outer coating
- Nitrile coating enhances grip strength in greasy and oily conditions
- Designed specifically with cargo handling professionals in mind
- Maximum Level 4 abrasion and tear resistance under EN 388
- Level 4 cut resistance guards the hand against blades and sheet metal edges
- Designed for use in contact with grease, oil, petrol and other slick substances
- Flexible and dexterous design makes for a lightweight pair of gloves
- Available in four different sizes for a guaranteed perfect fit
Which Size Is Right for Me?
To find your perfect size, simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
Size | Circumference of Palm (mm) | Length of Palm (mm) |
Size 7 (Small) | 178mm | 171mm |
Size 8 (Medium) | 203mm | 182mm |
Size 9 (Large) | 229mm | 192mm |
Size 10 (Extra Large) | 254mm | 204mm |
MaxiCut 44-505 Protection Ratings and Standards
EN 388
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used for protection against mechanical machinery by measuring the fabric's abrasion, cut, tear and puncture resistance.
The EN 388 cut resistance test uses a single sharp implement to repeatedly pressure a glove in order to determine the amount of force required to cause visible and functional damage.
Standard | Resistance Rating |
Abrasion Resistance | Level 4 |
Cut Resistance | Level 4 |
Tear Resistance | Level 4 |
Puncture Resistance | Level 2 |
ISO Cut Resistance | Level C |
Level 4 Abrasion Resistance
Abrasion resistance is often under-looked in terms of EN 388. MaxiCut OIL 44-505 Safety Gloves have been awarded the highest possible Level 4 rating. This indicates they can withstand a tonne of traffic, constant contact and wear.
Which APPLICATIONS AND ENVIRONMENTS Suit 44-505 Safety Gloves?
Following on, we have put together a list of professions and environments that we believe suit ATG MaxiCut 44-505 Safety Gloves perfectly. Please view the list below to take a look:
Discover the MaxiCut Range
ATG's MaxiCut range features a selection of mechanically resistant safety gloves. Please view the video below to see what the technology used in this range can do to protect your hands at work:
Oil Resistant Outer Coating
Oil and grease regularly conspire to compromise your grip strength and stability. Even if you can't see them, particles often linger on the glove face, causing material to slowly slide down your hand. MaxiCut 44505 Safety Gloves use a premium-quality nitrile coating to absorb harmful particles and prevent this from happening.
What Are the Benefits of a Nitrile Coating?
Nitrile is an incredibly flexible coating that provides additional resistance to oil, fuel and chemicals. Nitrile is used as a protective coating in gloves because it matches the pliability of latex with the hazard and injury protection properties of a heavier, woven glove.
What Are the Benefits of a 3/4 Coating?
For many professionals, a 3/4 coating is their go to. It allows the back of the glove to breathe naturally, releasing odour and perspiration without compromising your safety. The palm and fingers remain coated, allowing you to carry, lift and transfer material without interference.
Reinforce Your Hands
Fed up your gloves tearing at the thumb? This recurring issue is a problem for tradesmen everywhere. ATG recognise this and manufacture their MaxiCut Gloves with a reinforced thumb crotch. This means when you make a fist, lift heavy material or flex your fingers, the vulnerable ridge area between the thumb and index finger flexes with you, guarding against rips and splitting.
Additional Documentation