HexArmor AP382 24 x 38" Level F Cut Resistant Maximum Protection Work Apron

Working with highly hazardous and dangerous material comes at a cost. Guarding your heart, lungs and chest from serious injury is a must if you work in food preparation, fabrication or blade handling. The HexArmor AP382 24 x 38" Level F Cut Resistant Maximum Protection Work Apron ties around the neck and waist, preventing the life-threatening injuries that can occur when handling serious material.

What's Included?

• 1 x Cut Resistant Apron

Which Size HexArmor AP382 Apron Is Right for Me?

HexArmor manufacture the AP382 Apron to a single, one-size-fits-most design. Wider than usual and running from the top of the chest to the bottom of your waist, the HexArmor Apron covers the most amount of surface area possible to maximise protection. The dimensions of the Level F Apron as found below:

• Length: 38"
• Width: 24"

Key Features and Benefits of the HexArmor AP382 Level F Apron

• Maximum protection in every EN 388 category makes it industry best performing apron
• SuperFabric construction guarantees protection against blades, knives and sharp objects
• 24" x 38" dimensions ensures the entire torso is guarded
• Double SuperFabric material across the entire apron
• Maximum Level F cut-resistance under EN 388
• Level 4 abrasion and tear resistance for a long lasting product
• Wide fit naturally wraps around for maximum surface area coverage
• Lightweight and inobtrusive for a seamless fit
• One-size-fits-most design takes the hassle out of shopping

HexArmor AP382 Level F Cut Resistant Apron Protection Ratings

EN 388

• 4X44F

EN 388 is a European regulation governing the sale of garments used for safety and protection. It determines a fabric's performance when used for protection against mechanical machinery by measuring abrasion, cut, tear and puncture resistance.

The EN 388 cut resistance test uses a single sharp implement to repeatedly pressure a garment in order to determine the amount of force required to cause visible and functional damage.

Level F Cut Resistance

Level F is the maximum rating awarded under EN 388. The test involved involves lowering a sharp implement onto a piece of fabric until a certain level of damage is done. Level F dictates that a sharp implement would have to generate in excess of an incredible 30 newtons of pressure to cause damage.

So, What Does this Mean for You??

In the real world, this rating is the difference between a blade, knife, machine part or serrated edge cutting straight through a piece of fabric to cause life-threatening injury and it either being deflected or lodged in between tightly woven cut-resistant fibres. Don't take the chance.

Suitable Applications for the HexArmor Cut Resistance 38" Apron

A Level F Apron is a brilliant addition to any workwear wardrobe. Protect yourself against blades, knives, machine misfire and unforeseen accidents. Please see the list below for a few example professions:

• Assembly
• Blade Handling
• Blade Manufacture
• Carpentry
• Fabrication
• Food Preparation
• Food Processing
• Glass Handling
• Grinding
• Instillation
• Joinery
• Machine Operation
• Metal Handling
• Oyster Shucking
• Sheet Metal Handling
• Wood Handling

Innovative SuperFabric Cut Resistant Material

SuperFabric is an innovative fabric blend developed in 1996 to provide a lightweight, revolutionary solution to work and trade problems. SuperFabric is incredibly slight, allowing the user to move, flex and bend as much as required without obstruction.

Double Down on Protection

Thought one layer of ultra cut-resistant material was enough? Think again. In an unprecedented design move, HexArmor have doubled down on their understanding of protection. The AP382 Apron comes complete with two layers of SuperFabric at the stomach and chest area, maximising protection and blowing the competition out the water.

Extended Design

Coverage is the name of the game. Any exposed skin poses a serious threat in dangerous environments. With dimensions of 24" by 38", the HexArmor Level F Apron guarantees that none of the torso is left exposed. Simply wrap the apron around your waist, tie it off and get back to what you do best.

Protective by Name, Protective by Nature

Garments regularly claim complete protection without the ratings to back it up. The HexArmor AP382 Apron has maximum ratings in every resistance category. It has the highest possible abrasion, cut, puncture and tear resistance, making it the best heavy-duty protection apron on the market.

Additional Documentation

• Product Sheet
• Washing Instructions
• UKCA Declaration of Conformity Statement

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.