HexArmor Chrome Series 4026 Hi Vis Mechanics Cut Resistant Gloves

The HexArmor Chrome Series 4026 Hi Vis Mechanics Cut Resistant Gloves deliver industry leading cut resistance as a popular mechanics glove, with extra features such as impact protection and high visibility. These safety gloves are designed with enhanced grip to meet the demands of light oil applications and similar situations whilst still exceeding expectations of comfort, dexterity and fit. With extra impact protection on the back of hand and knuckles these gloves are ideal for mechanics, construction and engineering and manufacture industries.

The HexArmor Chrome Series 4026 High Vis Mechanics Cut Resistant Gloves are made with the highest quality materials making it strong, light weight, dexterous and comfortable. The Chrome Series 4026 uses SuperFabric branded material for the highest cut resistance available on the market, EN388 Cut Level 5.

The HexArmor Chrome Series 4026 Hi Vis Mechanics Cut Resistant Gloves also boast oil resistant synthetic leather palm PVC grip enhances grip in dry and light oil conditions whilst remaining dexterous. The gloves also feature abrasion resistant PVC dots for maximum grip in oily situations.

APPLICATIONS FOR THE HEXARMOR CHROME SERIES 4026 Hi Vis Mechanics CUT RESISTANT GLOVES

• Blade Handling
• Construction
• Waste Management
• Warehousing, Transport and Logistics
• Utility
• Local Authority
• Engineering and Manufacture
• Glass Manufacture and Glazing
• General Work
• Maintenance
• Machinist
• Mechanics Work
• Offshore gas
• Offshore oil
• Oil refining
• Petroleum industry
• Railway maintenance
• Stationary blade handling
• Transportation
• Utilities
• Wind turbines
• Cable/Wire Handling
• Glass Handling
• Wood Handling
• Metal Handling
• Machine Repair

Please note - this list is not exhaustive, the HexArmor Chrome Series 4026 Mechanics Cut Resistant Gloves are well suited to a number of other tasks and industries.

Main Features of the HexArmor Chrome SERIES 4026 Hi Vis MECHANICS CUT RESISTANT GLOVES

Cut Resistance

The HexArmor Chrome Series 4026 Mechanics Cut Resistant Gloves are made with SuperFabric branded material which is a strong and flexible fabric which is reinforced with tiny armour plates which allow the fabric to move and bend but offers excellent cut resistance. The gloves also feature oil resistant synthetic leather palm PVC grip enhances grip in dry and light oil applications, making the gloves ideal when using tools and equipment.

Impact Protection

The HexArmor Chrome Series 4026 Hi Vis Mechanics Cut Resistant Gloves have an impact-protective design which lines the back of the hand and the knuckles. This soft rubbery skeleton dissipates blows to the back of the hand over a larger surface to decrease impact. This feature makes the gloves ideal for machine repair and tool handling. This back of hand protection can be seen close up in the image below.

specifications of the HexArmor Chrome Series 4026 Hi Vis Mechanics Cut Resistant Gloves

• SuperFabric brand material palm provides Level 5 cut resistance
• Palm protection of  Level 5 Cut Resistance
• Oil-resistant synthetic leather palm with PVC print enhances grip in dry and light oil applications, while providing dexterity to utilize tools and equipment and increasing abrasion resistance
• Superior back-of-hand impact protection system utilizes an advanced design to dissipate forceful blows over a large area
• Padded palm reduces vibration damage while returning a higher level of comfort
• Interior seams implement a double-stitched core-spun thread, adding further durability and longevity
• Elastic cuff for a secure fit and Velcro fastening
• High visibility tape and bright yellow colour increases awareness
• Launderable

testing of the HexArmor Chrome Series 4026 Hi Vis Mechanics Cut Resistant Gloves

EN 388:2003 - Resistance to Mechanical Hazards

The HexArmor Chrome Series Mechanics Cut Resistant Gloves have been tested in accordance to EN 388:2003 to determine their level of mechanical protection. The HexArmor Chrome Series 4026 Cut Resistant Gloves score a rating of 4521 which is explained in the table below:

Sizing Information

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

Safety Warning

This product is cut and puncture resistant but not cut and puncture proof. Do not use with moving or serrated blades or tools. Always conduct a safe test to make sure it is suited for your uses.

The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.

Additional information on the HexArmor Chrome Series 4026 Cut Resistant Gloves

HexArmor is a registered trademark of Performance Fabrics, Inc. SuperFabric is a registered trademark of HDM, Inc.

Protected by patents and patents pending

DOCUMENTATION FOR THE HEXARMOR GLOVES

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Coronavirus Update

We are still dispatching orders throughout the Coronavirus epidemic. On occasion, due to spikes in demand for certain products, our dispatch times may be slightly extended.

You will receive an email confirming dispatch when your order is on its way to you.

Our team are working hard to process orders as quickly as possible. We would like to thank you for your patience and understanding during this challenging time.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.