Polyco Freezemaster II Cool Handling Gloves
The Polyco Freezemaster II Cool Handling Gloves are premium leather safety gloves which offer exceptionally comfortability whilst keeping the user protected, warm and dry. The Polyco Freezemaster II Cool Handling Gloves are designed with a fleecy lining to provide insulation to the hands.
The Polyco Freezemaster II Cool Handling Gloves are ideal for use in cold and wet situations as boast a waterproof membrane which resists water and also helps retain heat. With good abrasion and puncture resistance, this versatile safety glove is perfect for a wide range of environments.
Spandex on the back of the Polyco Freezemaster II Cool Handling Gloves ensure a great level of flexibility and comfort for extended use, and the reflective piping improves visibility and therefore increases the safety of the wearer.
An elasticated wrist holds the glove in place and provides a secure fit. The Polyco Freezemaster II Cool Handling Gloves is available in standard length or with extra long cuff, this provides additional protection and warmth.
The product code for these gloves is FM2.
Main Features of the Polyco Freezemaster II Cool Handling Gloves
Leather Safety Gloves
Made from premium quality leather, the Polyco Freezemaster II Cool Handling Gloves are a sturdy safety glove which offer good resistance to abrasions and punctures.
Insulation
The Polyco Freezemaster II Cool Handling Gloves offer great insulation from cold temperatures and have been tested in accordance to European Standard EN 511. A thick leather and fleecy lining help to keep hands warm in cold environments such as food refrigerators or outdoors.
Waterproof Lining
A waterproof lining keeps hands dry and further protected from the cold. This makes the gloves particularly suited to outdoor and wet conditions.
Secure Fit
The Polyco Freezemaster II Cool Handling Gloves have an elasticated wrist for a secure fit. The gloves are available in a standard length or with a longer cuff for additional warmth and protection.
Testing Of The Polyco Freezemaster II Cool Handling Gloves
EN 388 - Resistance to Mechanical Hazards
| Mechanical Test | Performance Level |
| Abrasion | 2 |
| Blade Cut | 1 |
| Tear | 1 |
| Puncture | 2 |
EN 511- Protection from Cold
| Tested Against | Performance Level |
| Convection Cold | 2 |
| Contact Cold | 2 |
| Water Impermeability | X |
Applications for the Polyco Freezemaster II Cool Handling Gloves
- Cold Store Duties
- Food Packaging
- Warehouse Work
- Construction
- Waste Management
- Food Manufacturing and Preparation
- Warehousing, Transport and Logistics
- Utility
- Local Authority
Sizing Information Of The Polyco Freezemaster II Cool Handling Gloves
Wearing the correct sized glove is essential to ensure safety and comfort. If gloves are too small they may be stretched, reducing protection and making them more likely to tear. If gloves are too large they can be pulled off by machinery or even pull the hand into moving machinery. Ill-fitting gloves will also greatly reduce dexterity and cause fatigue. European Standard EN420 sets out general requirements for sizing. To determine the size of glove required, measure the circumference of the dominant hand above the thumb and below the fingers, as shown in the diagram. This can then be referenced to the table below.
| |  | In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes. |
| Glove Size | 6 (XS) | 7 (S) | 8 (M) | 9 (L) | 10 (XL) | 11 (XXL) |
| Measurement across palm | 6cm | 7cm | 8cm | 9cm | 10cm | 11cm |
Further Information on the Polyco Freezemaster II Cool Handling Gloves
The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.
To get the best service from your gloves ensure that after use all contaminant is removed.
Store in dry conditions away from direct sunlight and heat.
You are advised to retain this packaging for reference.
These safety gloves should not be worn where there is a risk of entanglement with moving machinery.
| Conformity Statement | Instructions for Use |
 | |
