Polyco Polygen Chemical Resistant Mechanics Glove
The Polyco Polygen Chemical Resistant Mechanics Glove is a lightweight PVC coated gauntlet which provides good chemical resistance against a variety of chemicals. The Polyco Polygen has a roughened finish which offers excellent grip to the user in both wet and dry conditions.
The Polyco Polygen Chemical Resistant Mechanics Glove is PVC coated over the entire hand for maximum protection. This safety glove has excellent abrasion and tear resistance which means it offers durable protection. A soft cotton interlock knitted liner helps to keep the hands cool, dry and comfortable even during extended use.
The Polyco Polygen Chemical Resistant Mechanics Glove is available in three different lengths protecting the top of the arm.
Main Features Of The Polyco Polygen Chemical Resistant Mechanics Glove
Allows for good levels of dexterity.
Provides excellent grip in wet and dry conditions.
Various Lengths Available
Available in multiple lengths depending on level of forearm protection needed.
Full PVC coating protects the whole of the hand.
A cotton interlock knitted liner keeps hands cool and fresh.
Performance And Durability
Excellent tear and abrasion resistance.
Helps keep the safety glove fresher.
Testing The Polyco Polygen Chemical Resistant Mechanics Glove
EN 388 - Mechanical Hazards
|Hazard ||Resistance Rating |
|Abrasion Resistant ||4 |
|Cut Resistant ||1 |
|Tear Resistant ||2 |
|Puncture Resistant ||1 |
EN 374 - Chemical Hazards
|Hazard ||Performance Level |
|n-Heptane ||> 30 mins |
|Methanol ||> 60 mins |
|Paraffin ||> 60 mins |
|Sodium Hydroxide 40% ||> 480 mins |
|Sulphuric Acid 98% ||> 60 mins |
|Trichloroethylene ||> 10 mins |
|Unleaded Petrol ||> 10 mins |
Applications For The Polyco Polygen Chemical Resistant Mechanics Glove
- Waste Management
- Local Authority
- Engineering & Manufacture
- Hair & Beauty
Sizing Your Polyco Polygen Chemical Resistant Mechanics Glove
| || || |
In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand.
We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres.
Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.
|Glove Size ||9 - Medium ||9.5 - Large ||10 - Extra Large |
|Measurement across palm ||9cm ||9.5cm ||10cm |
This product should not be used with moving or serrated blades. The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use.
|9 Medium (27cm) ||polyco_P31/E9 |
|10 Large (27cm) ||polyco_P31/E9.5 |
|11 Extra Large (27cm) ||polyco_P31/E10 |
|11 Extra Large (30cm) ||polyco_P32/E10 |
|11 Extra Large (35cm) ||polyco_P33/E10 |
Conformity Statement and User Information
Please find the conformity statement and user information for these gloves by clicking the PDF link below.