Portwest A140 Thermal Grip orange and Black Gloves (Case of 144 Pairs)

In cold conditions the motor skills of the hands are greatly reduced, increasing the risk of injury and reducing productivity. An excellent solution to this problem is the Portwest A140 Thermal Grip Orange and Black Gloves (Case of 144 Pairs), which use an acrylic thermal liner to ensure warmth and a crinkle latex grip to enhance grip in slippery conditions.

Save Money By Buying in Bulk

The Portwest A140 Thermal Grip Orange and Black Gloves are popular gloves, and with this offer you can buy a case of 144 pairs at a discounted price. Ideal for businesses that require high levels of health and safety, this offer lets you save money on your essential safety wear. To purchase these gloves in a single pair, please see the standard listing.

Mechanical Properties of the Portwest A140 Thermal Orange and Black Grip Gloves

The Portwest A140 Thermal Grip Gloves offer excellent protection against a wide range of mechanical risks. They have been tested in accordance with EU standards to ensure a high level of performance. Please find the results below:

EN 388

EN 511

Top Pick for Thermal Grip Gloves

The Portwest Thermal Grip Orange and Black Gloves A140 are a top pick among thermal gloves because they can keep hands warm and comfortable without restricting dexterity and grip. Their thermal acrylic liner works with a latex crinkle grip that enhances grip even in wet and slippery environments. 

Features of the Portwest Gloves A140

• Features excellent cold resistant qualities
• Fitted with a crinkle latex coating that enhances grip
• Supplied with an acrylic liner that provides good mechanical protection
• Complies with EN standards EN 388 and EN 511
• Offers superb abrasion and tear resistance increasing longevity
• Thin and tight fitting design ensures a secure fit
• Breathable design prevents hands from becoming too hot
• Seamless design increases comfort during use
• Available in a wide range of sizes and colours

Suitable for a Range of Industries

The Portwest Thermal Orange and Black Gloves offer exceptional versatility, and are useful in any industry where protection from the cold is required. They are suitable for use inside and outside, in dry, wet and oily conditions and in dirty and clean environments. Some applications where these gloves are recommended include:

• Assembly
• Automotive
• Builders
• Construction
• Cold store
• DIY
• Industrial work
• Local authorities
• Maintenance
• Mechanics
• Metal handling
• Outdoor work
• Packaging
• Packing
• Product inspection
• Railway maintenance
• Refuse collection
• Scaffolding
• Transport
• Utilities

Product Codes

The codes for the Portwest Thermal Gloves are as follows:

• A140ORBM
• A140ORBL
• A140ORBXL
• A140ORBXXL

Sizing of the Portwest Thermal Grip Orange and Black Gloves

The Portwest A140OR are available in four sizes that should be suitable for most users. To find your perfect pair, please measure the circumference and length of your palm and match the results to the table below.

Documentation for the Portwest Thermal Gloves

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.