Shield GI/104 Extra-Long Heavy-Duty Rubber Gauntlets

The Shield GI/104 Extra-Long Heavy-Duty Rubber Gauntlets are ergonomically-shaped rubber gauntlets designed to provide comfortable protection for high-risk and heavy-duty applications. An approximately 400mm, extra-long cuff provides the user with enhanced protection against contact with harmful substances and chemical splashback. 

High-Quality Protection

The Shield GI/104 Gauntlets are manufactured from high-quality natural rubber latex, which makes them tough and flexible. As a result, they provide reliable and comfortable protection against abrasion and harmful substances.

Improved Fit

An ergonomic, hand-specific design provides a good fit and feel, reducing hand fatigue during extended use. A completely smooth finish further adds to the comfort level and improves user dexterity.

Addition Attributes

• Unlined
• Black in colour
• Shelf-life of three years
• Rated EN420 Dexterity: Level 3

Enhanced Protection

The GI/104 Gauntlets are resistant to some detergents, alcohols, acids and alkalis. An approximately 400mm cuff provides increased arm protection against direct contact and liquid splashback.

Packaging Details

The GI/104 Gauntlets are sold in hand-specific pairs. Each pair is sealed in a pouch to protect the gauntlets from damage prior to use. 

Resistance Ratings

The GI/104 Gauntlets are tested to EN388 for their resistance to abrasion, cut, tear and puncture. Please see the table below for the results of these tests:

The GI/400 Gauntlets are also tested to EN374 for resistance to chemicals. Please see the table below for the results:

Regulatory Compliance

The GI/104 Gauntlets are manufactured in accordance with:

• European Personal Protective Equipment Directive 89/686/EEC
• CE Category: Cat III (0120)

The GI/104 Gauntlets are tested to:

• EN420 Protective gloves: General requirements
• EN388 Protective gloves: Mechanical hazards
• EN374-2 Protective gloves: Chemicals and Micro organisms penetration
• EN374-3 protective gloves: Chemicals and Micro organisms permeation

Uses for the GI/104 Rubber Gauntlets

The GI/104 Gauntlets are suitable for a number of applications across a wide range of industries. These uses include (but are not limited to):

• Industrial cleaning
• Pest control
• Refuse handling
• Construction
• Lab work
• Assembly
• Engineering
• Fabrication
• Plumbing

Sizing of the GI/104 Gauntlets

The GI/104 Gauntlets are available in sizes 9 and 10. To find the correct size, measure your hand across the widest part of your palm, as shown below, then refer to the sizing table underneath. 

Warning: This product contains natural rubber latex which may cause allergic reactions including anaphylactic response.

How Long Are the Gauntlet Cuffs?

The cuff extends an equal length the entire way around the arm, but differs in length depending on the size of the gloves:

• Size 9: 392mm long
• Size 10: 406mm long
• Size 11: 406mm long

Documentation for the GI 104 Gloves

Conformity Statement	Instructions for Use

Delivery

This item will be dispatched by 1st Class Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Coronavirus Update

We are still dispatching orders throughout the Coronavirus epidemic. On occasion, due to spikes in demand for certain products, our dispatch times may be slightly extended.

You will receive an email confirming dispatch when your order is on its way to you.

Our team are working hard to process orders as quickly as possible. We would like to thank you for your patience and understanding during this challenging time.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.