Polyco Dyflex Plus N Level 5 Cut resistant Gloves

The Polyco Dyflex Plus N Level 5 Cut Resistant Gloves provide the highest level of cut resistance according to CE Standards EN388 Testing. The Polyco Dyflex Plus N Cut Resistant Gloves are designed to be a lightweight cut resistant glove with foamed nitrile coating and extra reinforcement between the thumb and index finger (thumb crotch).

Polyco products are engineered and manufactured to provide users with the highest levels of protection in areas where risk is greatest. Polyco products are made and quality control checked to the highest standards and introduce innovation to engineering of safety glove products.

The product code for these gloves is DPN. They are also available for purchase in case quantity.

Main Features of the Polyco Dyflex Plus N Cut Resistant Gloves

The Materials - The Polyco Dyflex Plus N Gloves are engineered and made with a knitted upper and foamed nitrile coated palm, making the protection areas highly resistant against abrasion, cut and tear hazards. The Dynaflex Plus N Cut Resistant Gloves also feature a flat nitrile reinforcement between the thumb and forefinger, this feature offers additional protection in an area susceptible  to wear. 

Grip - The grip of the Dyflex Plus N Gloves consists of a foamed nitrile palm coating which channels oil and liquids away from the surface of the gloves. This design optimises the grip to allow for safe handling while in oily or greasy working environments.

Comfort and Dexterity - The elasticated knitted wrist ensures a secure fit and protects from dust and dirt getting in over the glove. The Dyflex Plus N has a seamless breathable liner with a highly flexible palm coating. The gloves are designed especially to be a close fitting to provide even greater dexterity. 

Testing - The Dyflex Plus N Gloves are a Certified Safety Glove, scoring a 4543 in testing. The gloves exceeded the highest level of cut resistance according to CE standards as well as performing well in abrasion, puncture and tear resistance tests. See below for a breakdown of this testing. 

The Polyco Dyflex Plus N gloves are designed to be worn either as a single glove solution or as a glove liner.

Conditions - This information is designed to aid product selection; assessing the suitability of the Gloves for certain tasks are the responsibility of the user/employer. 

Applications of the Polyco Dyflex Plus N Cut Resistant Gloves

The Dyflex Plus N Gloves are lightweight and flexible safety gloves with optimal cut resistant palm and palm side fingers. The gloves protect against cut hazards to the highest level and puncture, tear and abrasion to a high standard. The Dyflex Plus N Gloves are suitable for indoor or outdoor working environments in dirty or clean conditions and protect against oils and grease even in wet conditions. The gloves can be used in various industries for a number of different tasks, some of these industries include:

• Construction
• Automotive
• Assembly
• Warehousing, Transport and Logistics
• Engineering and Manufacture
• Glass Manufacturing and Glazing
• Oil and Gas
• Utility

Specifications of the Dyflex Plus N Cut Resistant Gloves

Below is some additional specific information about the Dyflex Cut Resistant Gloves.

• EN388 Rating 4543

• Highest Cut resistance

• Washable

• Foamed nitrile palm coating

• Comes in four size options (sizing options and advice are below)

• Gloves should be stored in dry conditions

• When stored gloves will not suffer in mechanical properties for up to five years from the date of manufacture

• The life of the gloves is difficult to estimate, it depends completely on application and responsibility of the user

• Knitted wrist design makes it soft and comfortable to wear

• Tested in accordance with EN 388:2004

• Reinforced thumb crotch

• High level of dexterity

• High level of grip

Sizing Information

In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.

Safety Warning

Please note - This product should not be used with moving or serrated blades.

Please note - The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use. 

Documentation for the Dyflex Plus N Gloves

Conformity Statement	Instructions for Use

Ask A Question About This Product

If you would like further information about this product please get in touch with us - we're here to help.

You can contact the Safety Gloves Customer Care Team by email using the form below. A member of the Team will respond to you personally as soon as they can.

Alternatively, you can get in touch by telephone on 020 7501 1104. Our offices are open between 09:00 and 17:00, Monday to Friday (excluding Bank Holidays).

Your Name:	*
Your Email Address:	*
Your Message:	*
	*
	Please add the two numbers

Send Your QuestionSend Your Question

We look forward to helping you with your enquiry.

Delivery

This item will be dispatched by 1st Class Royal Mail, DPD courier or UPS courier.

The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).

Please contact our Customer Care Team on 020 7501 1104 for an up to the minute delivery expectation for this product.

UK Delivery Charges

Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.

What is EN 388?

You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.

There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.

How Do I Read the EN 388 Score?

Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.

Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.

Where Can I Find Out More?

This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.