Polyco Polysol 35 cm Double Dipped PVC Glove
The Polyco Polysol 35 cm Double Dipped PVC Glove is a chemical resistant glove with cotton interlock knitted liner. This PVC glove, which has been double dipped for extra protection, performs well to protect against a variety of chemicals including hydrocarbons and certain solvents.
Attaining the maximum European Standard EN 388 score for abrasion resistance, the Polyco Polysol 35 cm Double Dipped PVC Glove also provides good tear resistance enhancing the safety glove's mechanical protection and durability.
This safety glove is designed with a granular non slip surface area over the hand to further enhance abrasion resistance and to maximise grip levels. The cotton interlock liner provides exceptional comfort keeping the hands cool and comfortable.
The Polyco Polysol 35 cm Double Dipped PVC Glove is available to purchase is 27 cm, 35 cm and 40 cm lengths.
The product code for these gloves is P73.
Features of Polyco Polysol Double Dipped PVC Glove
Excellent resistance against a variety of chemicals including hydrocarbons and certain solvents.
A granular non slip pattern over the hand ensures good grip in both wet and dry conditions.
Comfortable and Cool Lining
The Polyco Polysol Double Dipped PVC Glove has a soft cotton interlock knitted liner to help keep hands cool and dry and reduce hand fatigue.
Treated with Actifresh, the Polyco Polysol Double Dipped PVC Glove stay fresh.
Extra Long Cuff
An extra long cuff of 27cm provides additional protection to the forearm.
Testing Of The Polyco Polysol 35 cm Double Dipped PVC Glove
Chemical Resistance EN 374
|Chemical ||Breakthrough Time (mins) |
|Acetone ||>10 mins |
|n-Heptane ||>30 mins |
|Methyl ethyl ketone ||> 10 mins |
|Paraffin ||>60 mins |
|Sodium Hydroxide 40% ||>480 mins |
|Sulphuric acid 30% ||>480 mins |
|Sulphuric acid 98% ||>60 mins |
|Trichloroethylene ||>10 mins |
|Unleaded petrol ||>10 mins |
|Xylene ||>30 mins |
Mechanical Hazards EN 388:2003
|Mechanical Hazard ||Performance Level |
|Abrasion ||4 |
|Blade Cut ||1 |
|Tear ||2 |
|Puncture ||1 |
Applications for the Polyco Polysol Double Dipped PVC Glove
- General Maintenance
- Waste Management
- Local Authority
- Engineering & Manufacture
- Chemical Manufacture & Use
- Petroleum & Chemical Operations
Sizing Information for the Polyco Polysol Double Dipped PVC Glove
| || |
In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand.
We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres.
Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes.
|Glove Size ||9.5 - Medium ||10 - Large ||11 - Extra Large |
|Palm Measurement ||9.5cm ||10cm ||11cm |
The information contained on this site is intended to assist the wearer in selection of Personal Protective Equipment. The results of physical tests should also help in glove selection however, it must be understood that actual conditions of the use cannot be simulated and it is the responsibility of the user not the manufacturer or supplier to determine the glove suitability for the intended use.
Documentation for the Polysol Gloves
|Conformity Statement ||Instructions for Use |
| || |