Polyco Reflex KN Plus Kevlar Cut Resistant Gloves
The Polyco Reflex KN Plus Kevlar Cut Resistant Gloves provide excellent cut resistance and feature a seamless knitted Kevlar liner with a flexible nitrile coating.
The Polyco Reflex KN Plus Kevlar Cut Resistant Gloves are heavy duty safety gloves with their performance enhanced by the durable and puncture resistant coating. The flexible nitrile coating helps the glove achieve better sensitivity and feel.
Polyco products are engineered and manufactured to provide users with the highest levels of protection in areas where risk is greatest. Polyco products are made and quality control checked to the highest standards and introduce innovation to engineering of safety glove products.
The product code for these gloves is 8723 (Large) and 8724 (Extra Large).
APPLICATIONS OF THE POLYCO REFLEX KN PLUS KEVLAR CUT RESISTANT GLOVES
The Polyco Reflex KN Plus Kevlar Cut Resistant Gloves are lightweight and flexible safety gloves. The Reflex KN Plus Gloves are suitable for indoor working environments in dirty or clean conditions in a mainly dry environment. The gloves can be used in various industries for a number of different tasks including oily and greasy environments, some of these industries include:
- Construction
- Engineering and Manufacture
- Glass Manufacturing and Glazing
- Automotive Manufacturing
- Construction work
- Steel handling
- Timber and panel handling
MAIN FEATURES OF THE Polyco Reflex KN PLUS KEVLAR CUT RESISTANT GLOVES
The Materials - The Polyco Reflex KN Plus Kevlar Gloves are engineered and made with seamless knitted Kevlar liner with a flexible nitrile coating. This design provides excellent protection against cuts, slashes and abrasions and also provides exceptional comfort and reduces hand fatigue. The back of the glove is left uncoated allowing the hand to breathe. The elasticated wrist keeps dirt and debris out of the glove.
Grip - The KN Plus Gloves feature excellent grip in both wet and dry conditions making the gloves suitable for safe and secure handling. The gloves are often used in engineering and manufacture industries.
Testing - The Reflex K Plus Gloves are a Certified Safety Glove, scoring a 4443 in testing. The gloves perform well according to CE standards in abrasion, tear and cut resistance testing. See below for a breakdown of this testing.
Hazard | Resistance Rating |
Abrasion Resistant | 4 (Quite Resistant) |
Cut Resistant | 4 (Highly Resistant) |
Tear Resistant | 4 (Highly Resistant) |
Puncture Resistant | 3 (Quite Resistant) |
The Polyco Reflex KN Plus Kevlar Gloves are designed to be worn as a single glove solution but can be worn as a glove liner if the user deems it necessary.
Conditions - This information is designed to aid product selection; assessing the suitability of the Gloves for certain tasks are the responsibility of the user/employer.
SPECIFICATIONS OF The Reflex KN PLUS KEVLAR CUT RESISTANT GLOVES
Extra information on the Reflex KN Plus Safety Gloves:
- EN388 Rating 4443
- High level of cut and tear resistance
- Washable (Low temperature)
- Nitrile palm coating
- Comes in two size options (sizing options and advice are below)
- Gloves should be stored in dry conditions
- When stored gloves will not suffer in mechanical properties for up to five years from the date of manufacture
- The life of the gloves is difficult to estimate, it depends completely on application and responsibility of the user
- Knitted glove upper design makes it soft and comfortable to wear
- Tested in accordance with EN388
- Medium level of dexterity
- High level of grip
SIZING INFORMATION
| | In order to select the correct size of safety glove, simply measure across your palm at the point indicated in the picture. Then compare your measurement with the chart below to ensure that you select the correct size of glove for your hand. We would recommend using a tape measure or ruler to get the right measurement. Our measurements are based on centimetres. Where your measurement falls on the boundary of two sizes, we would recommend selecting the larger of the two sizes for a comfortable fit. However, if you would specifically like your gloves to be a closer fit, perhaps for work that requires fine movements, select the smaller of the two sizes. |
Glove Size | 9/L | 10/XL |
Measurement across palm | 9cm | 10cm |
Product Code | 8723 | 8723 |
SAFETY WARNING
Please note - This product should not be used with moving or serrated blades.
Please note - The information about this product is intended to assist the wearer in selection of personal protective equipment. The results of physical tests should also help in glove selection. However it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer or seller to determine glove suitability for the intended use.
Conformity Statement and User Instructions
Delivery
This item will be dispatched by Royal Mail, DPD courier or UPS courier.
The estimated delivery time for this item is usually 1-3 working days when ordered before 14:00, Monday to Friday (excluding Bank Holidays).
Orders that are placed before 14:00 on a working day are usually dispatched on the same day; for orders placed outside this timeframe, they are normally dispatched the next working day.
UK Delivery Charges
Certain orders delivered to the UK are subject to a delivery charge; refer to the table below for more information. Please note that all values are listed exclusive of VAT.
Order Value | UK Delivery Charge |
---|
Up to £39.99 | £4.95 |
£40.00 and over | FREE |
Please note: orders to NON-mainland UK and the Scottish highlands may be subject to an additional delivery charge, dependent on the size and value of the order.
What is EN 388?
You might have noticed that this product adheres to EN standard EN 388. EN standards ensure that the product you are buying meets the safety standards of the European Committee for Standardization (CEN), the highest standards organisation recognised by and working on behalf of the European Union. To pass any EN standard, a PPE product must undergo some of the most rigorous safety tests around.
There are many EN standards that our gloves adhere to. However, the EN standard that we’re concerned about here is EN 388. EN 388 stands for Mechanical Resistance, and informs you of your gloves' resistance to abrasion, cuts, tears and punctures.
How Do I Read the EN 388 Score?
Simply speaking, the higher the score that this product achieves, the better the product will be at resisting that hazard. Products will score between Level 0 and Level 4 for abrasion, tears and punctures, and if they weren’t tested for that hazard you will see N/A written instead of a number.
Cuts are a little different and, with the EN 388 standard rewritten in 2016, it means that gloves will either be tested to cut resistance or ISO cut resistance (sometimes called TDM cut resistance). Gloves tested to cut resistance will score between Level 0 and Level 5, and gloves tested to ISO cut resistance will achieve a score between Level A and Level F with the higher letter offering better cut protection.
Where Can I Find Out More?
This is just a brief overview of EN standard EN 388 so you know where you are standing. For further information, you can see the Introductory EN 388 Blog in our Knowledge Centre.